Builds a bootable Arch-based live ISO that auto-starts the Flask webinstaller from `../webinstaller/` on boot. User plugs in a USB, boots, and the installer wizard comes up on `http://proksi.local:5000` (or the raw IP shown on the console).
Runnable locally (below) or through Forgejo Actions — `.forgejo/workflows/build-iso.yml` builds on every push to `main` and on manual `workflow_dispatch`. The ISO lands as an artifact named `furtka-iso`, retained for 14 days. Feature branches don't trigger the ISO build; see `memory/project_ci_branching` for why.
Needs a host with Docker. Disk space required: ~15 GB scratch during the build, ~1.5 GB for the final ISO.
```bash
./iso/build.sh
```
Output ISO ends up in `iso/out/furtka-<date>-x86_64.iso`. Around 3–10 min on a 4-core VM. First run is slower because it pulls `archlinux:latest` and all packages from upstream.
The script re-execs itself inside a privileged `archlinux:latest` container. That's so `mkarchiso` has root + loop-mount access without polluting the host — Ubuntu hosts don't ship archiso natively anyway.
## What gets baked in
The build starts from Arch's stock `releng` profile (the same one used to build the official Arch ISO), then overlays our customizations from `overlay/`:
| `overlay/packages.extra` | Appended to the package list. Adds `python`, `python-flask`, `avahi`, `nss-mdns` |
| `overlay/profiledef.sh` | Appended to `profiledef.sh`. Renames the ISO to `furtka-*` with a dated version |
| `overlay/airootfs/opt/furtka/` | Directory where `webinstaller/` is copied at build time |
| `overlay/airootfs/etc/systemd/system/` | Contains `furtka-webinstaller.service` + a symlink into `multi-user.target.wants/` so it auto-starts on boot |
The systemd service runs `flask --app app run --host 0.0.0.0 --port 5000` under `/opt/furtka`. The `0.0.0.0` binding is important — the Flask default is localhost-only, which wouldn't be reachable from another machine on the LAN.
mDNS (`proksi.local`) via avahi is installed but not yet wired. First milestone is just "boot → browser → wizard at raw IP". Naming comes next.
2. Copy the ISO to your Proxmox host's ISO storage (typically `/var/lib/vz/template/iso/`). Browser uploads of 1.5 GB truncate silently — prefer `scp` over the Proxmox WebUI.
- **BIOS: OVMF (UEFI)**, add EFI Disk on `local-lvm`. SeaBIOS fails to load `ldlinux.c32` from our ISO; only the UEFI path works reliably.
- **Secure Boot disabled**. Our GRUB isn't signed, so Secure Boot rejects it with `Access Denied`. Either boot into OVMF setup (Esc during boot) → Device Manager → Secure Boot Configuration → Attempt Secure Boot [ ] → F10 → reboot. Or remove the EFI Disk and re-add it with "Pre-Enroll keys" unchecked.
5. Find its IP in Proxmox's VM summary (or your router's DHCP table)
6. Open `http://<vm-ip>:5000` — the existing 3-screen wizard should be there
## Known rough edges
- **Disk space**: the first time you build on a fresh host, the squashfs/xorriso steps need ~15 GB free. If the host's LVM-root is smaller, `xorriso` silently dies at the very end with "Image size exceeds free space on media".
- **No HTTPS yet**. The Furtka plan is "local CA + green padlock on `https://proksi.local`" — that's a later milestone. For now, plain HTTP.
- **Drive list includes `/dev/loop0` and `/dev/sr0`**. `/dev/loop0` is the live ISO's own squashfs mounted in RAM; `/dev/sr0` is the CD-ROM itself. Both appear as install targets, which is wrong. Filter lives in `webinstaller/drives.py` and hasn't been added yet.
