On dual-stack LANs network-online.target is satisfied by the IPv6 SLAAC
address about a second before DHCPv4 lands, so the first
furtka-catalog-sync run died with 'Network is unreachable' and the next
attempt was the daily timer (OnBootSec=10min + up to 6 h jitter). The
state file stayed on 'checking' and the apps page showed 'checking…'
with nothing running — first hardware bench, 2026-08-25.
- furtka-catalog-sync.service: Restart=on-failure every 20 s, up to 8
times in 15 min
- sync_catalog() writes stage 'error' + message on CatalogError, then
re-raises (body moved to _sync_locked())
- apps page shows 'last sync failed: <error>' for that stage
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MScAinbyMdeNc7H2BZdnnG
The /etc/issue banner on both the live ISO and the installed system was a
oneshot after network-online.target that simply dropped the http://<ip>
line when DHCP hadn't delivered yet — so a slow NIC (first hardware bench,
2026-08-24) left the screen offering only proksi.local. On the ISO,
releng's root autologin on tty1 also made agetty --reload a no-op.
- furtka-issue.timer (ISO) / furtka-welcome.timer (target) re-run the
banner script every 5 s; services drop RemainAfterExit + network wait
- fallback line is always present: every global IPv4, or a 'no IP yet —
check cable / DHCP' hint; only rewrites + reloads on change
- build.sh removes releng's getty@tty1 autologin drop-in; banner tells
users a shell is root + Enter away
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MScAinbyMdeNc7H2BZdnnG
Every Furtka since 26.5 shipped a Caddyfile with a
`__FURTKA_HOSTNAME__.local { tls internal }` site block, so every
first boot auto-generated a fresh self-signed CA + intermediate +
leaf. That worked for the first-ever Furtka user, but every reinstall
(or second box on the same LAN) produced a new CA whose intermediate
shared the fixed CN `Caddy Local Authority - ECC Intermediate` with
the previous one. Firefox caches intermediates by CN across profiles
— even private windows share cert9.db — so any visitor who had
trusted an older Furtka's CA got a cached intermediate with
mismatched keys when they hit the new box, producing
`SEC_ERROR_BAD_SIGNATURE`. Unlike UNKNOWN_ISSUER, Firefox has NO
"Advanced → Accept Risk" bypass for BAD_SIGNATURE, so fresh-install
boxes were effectively unreachable over HTTPS in any browser that
had ever seen a previous Furtka.
Validated live on the .46 test VM: fresh 26.14 ISO install → Firefox
hits BAD_SIGNATURE on https://furtka.local/ (even in private mode).
Chromium bypasses it via mDNS failure but the issue is the same.
openssl verify on the box confirms the chain is internally valid —
this is purely client-side cache pollution across boxes.
Fix:
- assets/Caddyfile: removed the hostname site block. Default install
serves :80 only — https://furtka.local connection-refuses, which is
a normal error every browser handles instead of the unbypassable
crypto fault. Added top-level import of
/etc/caddy/furtka-https.d/*.caddyfile so the /settings HTTPS toggle
can drop a listener snippet there when a user explicitly opts in.
- furtka/https.py: set_force_https now writes TWO snippets atomically
— the top-level hostname + tls internal block (enables :443) and
the :80-scoped redirect (forces HTTP→HTTPS). Disable removes both.
Reload failure rolls both back. Added _read_hostname + _https_snippet_content
helpers with `/etc/hostname` → 'furtka' fallback so a missing
hostname file doesn't produce an empty site block Caddy rejects.
- furtka/https.py::status: force_https now reads the listener
snippet (was reading the redirect snippet). A redirect without a
listener isn't actually HTTPS being served, so the listener is the
authoritative "HTTPS is on" signal.
- furtka/updater.py: new _maybe_migrate_preserve_https hook runs
inside _refresh_caddyfile on the 26.14 → 26.15 transition. If the
box had the redirect snippet on disk (user had opted into HTTPS
under the old regime), it writes the new listener snippet too so
HTTPS keeps working after the Caddyfile swap removes the hostname
block.
- webinstaller/app.py: post-install creates /etc/caddy/furtka-https.d/
alongside /etc/caddy/furtka.d/ so the glob import can't trip an
older Caddy on a missing path during the first reload.
Live-tested on .46: set_force_https(True) writes both snippets, Caddy
reloads, :443 listener comes up with fresh CA, curl -k returns 302,
HTTP 301-redirects. set_force_https(False) removes both snippets
atomically, :443 goes back to connection-refused.
Tests: test_https.py expanded from 13 to 15 cases. Toggle-on asserts
both snippets written + hostname substituted. Toggle-off asserts
both removed. Rollback cases verify BOTH snippets restore on reload
failure. New test_https_snippet_content_has_tls_internal_and_routes
locks the exact shape of the listener block.
test_webinstaller_assets.py: updated two old asserts that assumed
hostname block was in Caddyfile; new test_post_install_creates_https_snippet_dir
guards the new directory.
276 tests pass, ruff check + format clean.
Known remaining wart (documented in CHANGELOG): a browser that
trusted a prior Furtka CA still hits BAD_SIGNATURE on this box's
HTTPS after enabling it, because the fixed intermediate CN is a
Caddy-side limitation. Workaround: clear cert9.db or visit in a
fresh profile. Won't affect end users with one Furtka box ever.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
One-admin, one-password model — all of /apps, /api/*, /, and
/settings/ now require a signed-in session. Passwords are werkzeug
PBKDF2-hashed in /var/lib/furtka/users.json (mode 0600, atomic write
via the same .tmp+chmod+rename dance installer.write_env uses).
Sessions are secrets.token_urlsafe(32) tokens held in a module-level
SessionStore dict (thread-safe lock included for when we swap to
ThreadingHTTPServer). Cookies are HttpOnly, SameSite=Strict, and
Path=/, with Secure set when X-Forwarded-Proto from Caddy says HTTPS.
Two bootstrap paths:
* Fresh install — webinstaller step-1 collects Linux user + password,
the chroot post-install step hashes the password and writes
users.json on the target partition. First browser visit lands on
/login with the account already present.
* Upgrade from 26.10-alpha — no users.json yet, so /login detects
setup_needed() and renders a first-run setup form. POST creates
the admin and immediately logs in.
POST /logout revokes the server session and clears the cookie.
Unauthenticated HTML requests 302 to /login; unauthenticated API
requests 401 JSON so fetch() callers see a clean error. A sleep(0.5)
on failed logins is the brute-force speed bump on top of werkzeug's
~600k-iter PBKDF2.
Caddyfile gains /login* and /logout* handle blocks in the shared
furtka_routes snippet so both :80 and the HTTPS hostname block
forward the auth endpoints to localhost:7000. Without this Caddy
would 404 from the static file server.
Test surface:
* tests/test_auth.py (new, 19 cases): hash roundtrip, users.json
I/O, session create/lookup/expire/revoke.
* tests/test_api.py: new admin_session fixture; existing HTTP
tests updated to send the cookie; new tests cover login setup,
login success, wrong-password 401, logout revocation, and the
guard's 302/401 split.
* tests/test_webinstaller_assets.py: new case that unpacks the
users.json _write_file_cmd body and verifies the werkzeug hash
round-trips against the step-1 password.
Bumped version to 26.11-alpha and rolled CHANGELOG. Also folded in
the ruff-format fix that was pending from 26.10-alpha's lint red.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Format-only diff from `ruff format`. The 26.5-alpha push's CI run failed
on `ruff format --check`; these three files had two-line constructs that
fit on one line at ruff's default line length. No behaviour change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Closes#10. Two linked bugs in 26.4-alpha's Phase 1 HTTPS made the
force-HTTPS toggle fatal: every SNI handshake on :443 died with
SSL_ERROR_INTERNAL_ERROR_ALERT, so the toggle redirected users from
working HTTP to broken HTTPS.
Root cause 1: bare `:443 { tls internal }` gives Caddy no hostname to
issue a leaf cert for, so /var/lib/caddy/certificates/ stayed empty and
Caddy sent TLS `internal_error` on every handshake. Fix: the :443 block
is now `__FURTKA_HOSTNAME__.local, __FURTKA_HOSTNAME__ { tls internal }`,
with the marker substituted by webinstaller/app.py at install time and
by furtka.updater._refresh_caddyfile on self-update (reads /etc/hostname,
falls back to "furtka"). `auto_https disable_redirects` keeps Caddy's
built-in redirect out of the way of the /settings toggle.
Root cause 2: furtka/https.py and the /rootCA.crt handler both referenced
/var/lib/caddy/.local/share/caddy/pki/authorities/local/ — a path that
doesn't exist. caddy.service sets XDG_DATA_HOME=/var/lib, so Caddy's
storage is /var/lib/caddy/ directly. Fix: both paths corrected.
Verified on the 192.168.178.110 smoke VM by swapping the Caddyfile in,
reloading, handshaking, restoring: TLS 1.3 handshake succeeds, leaf cert
issued under /var/lib/caddy/certificates/local/, /rootCA.crt returns 200.
Tests: new cases assert the Caddyfile ships the hostname placeholder,
the webinstaller substitutes it, _refresh_caddyfile re-substitutes from
/etc/hostname on update, and the asset sets auto_https disable_redirects.
Unit tests still stub the Caddy reload — the real handshake regression
needs a smoke-VM integration test (follow-up, separate from this fix).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Caddy now serves both :80 (plain HTTP, unchanged default) and :443 with
tls internal — it generates its own per-box root CA on first start,
stored under /var/lib/caddy/.local/share/caddy/pki/authorities/local/.
Users can download rootCA.crt at /rootCA.crt (served on both listeners)
and install it per-OS via the new /https-install/ guide.
Settings page grows a Local HTTPS card with CA fingerprint, download
button, reachability probe, and an opt-in "force HTTPS" toggle. The
toggle only unhides itself once the current browser already trusts the
cert, so enabling it can't lock the user out of the settings page.
Backend: GET /api/furtka/https/status and POST /api/furtka/https/force
in furtka.https. The force toggle drops a Caddy import snippet into
/etc/caddy/furtka.d/redirect.caddyfile and reloads Caddy; reload
failure rolls the snippet state back so a bad config can't wedge the
next service start.
updater._refresh_caddyfile() ensures /etc/caddy/furtka.d exists before
every reload so 26.3-alpha → 26.4-alpha self-updates don't trip on the
new glob import directive.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Two install-path bugs surfaced by SSHing into the hot-fixed test VM:
1. mktemp creates the staging dir with mode 700 by default; the rename
to /opt/furtka/versions/<ver>/ preserved it, and Caddy (running as
the unprivileged `caddy` user) got 403 Forbidden because it couldn't
traverse the version dir. Now the install + self-update both
`chmod 755` after the rename.
2. _furtka_json_cmd was a silent no-op on the 43a39a4 VM — the
base64-encoded body + sed substitution approach layered two sets of
quotes through archinstall's custom_commands eval, and the sed
step either never ran or didn't match. Replaced with a plain
heredoc that interpolates $(date -Iseconds) and $(cat VERSION) at
chroot runtime. Result lands /var/lib/furtka/furtka.json reliably,
which is what the landing page's hostname chip and the settings
page's install-date field depend on.
Both issues confirmed fixed by applying them manually on the VM
(chmod 755 /opt/furtka/versions/26.0-alpha + writing furtka.json by
hand): landing page, /apps, /settings, /furtka.json all now 200 with
correct content.
Tests updated (the chmod 755 gets asserted; the old base64+sed test
gets replaced with a heredoc-shape check; the updater test asserts
0o755 mode on the finished version dir).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Root cause of today's 403 on a fresh install: assets/ lived inside the
Python package at furtka/assets/, so the resource-manager tarball
extracted to /opt/furtka/versions/<ver>/furtka/assets/. But Caddyfile
has `root * /opt/furtka/current/assets/www`, systemd units point at
/opt/furtka/current/assets/bin/furtka-status, and the install-time
`systemctl link /opt/furtka/current/assets/systemd/*.service` expected
the top-level layout. All three found nothing:
- Caddy → 403 Forbidden (empty/missing document root)
- systemctl link → silent no-op, nothing ever linked into
/etc/systemd/system/
- furtka-api.service + furtka-reconcile.service → "inactive" because
they were never registered
Nothing in the Python package ever imported furtka.assets — these are
shell scripts, HTML/CSS, systemd units, and a Caddyfile, which is
config data, not package data. Promoting assets/ to the repo root
matches how it's referenced everywhere downstream and eliminates the
path mismatch.
Changes:
- git mv furtka/assets assets
- iso/build.sh: tarball-staging step now also `cp -a "$REPO_ROOT/assets"`
so the tarball ships ./assets at its root, and the live-ISO copy
reads from $REPO_ROOT/assets instead of $REPO_ROOT/furtka/assets.
- scripts/build-release-tarball.sh: same for release tarballs.
- webinstaller/app.py: _resolve_assets_dir's dev fallback walks one
level up to REPO_ROOT/assets/.
- tests/test_webinstaller_assets.py: ASSETS constant updated.
Tests still green (150/150) because both paths were fs-level — no
code imports changed. Next ISO build will land assets at the path
everything downstream expects.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Five issues surfaced by the Phase-2 audit before the next ISO rebuild:
P1 (real blockers for a fresh install / self-update):
1. chmod +x furtka/assets/bin/furtka-status, furtka-welcome. They were
mode 644 in git, so the tarball shipped them non-executable and every
ExecStart referencing /opt/furtka/current/assets/bin/furtka-* would
have failed on first boot with Permission denied.
2. apply_update now refreshes /etc/caddy/Caddyfile from the new version
when the content differs, then reloads caddy. Without this, a release
that changes Caddy routes silently stays on the old config.
3. apply_update now systemctl-links any new unit files shipped by the
update, not just the five linked at install time. A future release
that adds furtka-foo.service would otherwise never appear in
/etc/systemd/system/.
P2 (hardening, not blockers today):
4. _resource_manager_commands now aborts the install if the tarball's
VERSION file is empty — otherwise `mv "$staging" /opt/furtka/versions/`
would move the staging dir in as a subdirectory and the symlink
target would be invalid.
5. _extract_tarball passes filter='data' to tarfile.extractall on
Python 3.12+ to catch symlink-escape / setuid / device-node tricks
that the regex path-check can't see. Falls back silently on older
interpreters.
Plus the CHANGELOG [Unreleased] section got filled in with the whole
Phase-1 + Phase-2 + UI-uplevel body so a 26.1-alpha tag cut off main
has meaningful release notes.
Test additions / updates:
- test_refresh_caddyfile_{copies_when_different,noops_if_source_missing}
- test_link_new_units_only_links_missing
- test_extract_tarball_uses_data_filter_when_available
- test_apply_update_happy_path now verifies the Caddyfile gets copied.
- test_resource_manager_extracts_to_versioned_slot verifies the
empty-VERSION guard is present in the install command.
Paths now overridable via FURTKA_CADDYFILE_PATH + FURTKA_SYSTEMD_DIR so
tests can pin a tmpdir for these new fs operations.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Slice 2 of the self-update story. Tagging a release on main now
produces a downloadable self-update payload on the Forgejo releases
page, and a running box can pull it down, verify it, atomically swap
to the new version, and health-check the result.
New pieces:
- scripts/build-release-tarball.sh <version> — packages the furtka/
package + bundled apps/ + a root-level VERSION file as
dist/furtka-<version>.tar.gz, plus a .sha256 sidecar and a
release.json metadata blob.
- scripts/publish-release.sh <version> — uses the Forgejo v1 API to
create a release (body pulled from the CHANGELOG section for this
tag, pre-release auto-flagged on -alpha/-beta/-rc) and upload the
three assets sequentially. Needs \$FORGEJO_TOKEN.
- .forgejo/workflows/release.yml — tag-triggered, runs both scripts
with the new \$FORGEJO_RELEASE_TOKEN repo secret.
- furtka/updater.py — check_update, prepare_update, apply_update,
run_update, rollback. Atomic symlink swap, sha256 verify (TOCTOU-
safe: re-hashes on-disk file), health-check post-restart with
auto-rollback on failure, stage-by-stage progress persisted to
/var/lib/furtka/update-state.json so the UI can poll independent
of the (restarting) API process. Path overrides via FURTKA_ROOT /
FURTKA_STATE_DIR / FURTKA_LOCK_PATH so tests pin a tmpdir.
- furtka/cli.py — \`furtka update [--check] [--json]\` and
\`furtka rollback\`.
- tests/test_updater.py — 15 tests: version compare, sha256 verify,
tarball extract (including traversal refusal), lockfile, apply
happy + rollback paths, rollback CLI, check_update with stubbed
Forgejo.
- iso/build.sh — writes VERSION at the tarball root so the install
path matches the self-update path (previously assumed only the
release script did this).
RELEASING.md now points at the automated flow — no more manually
clicking "Create release" on the Forgejo UI.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Slice 1b of the self-update story. The installer now sets up a versioned
layout — install extracts the resource-manager tarball to a staging dir,
reads the VERSION it contains, moves the dir to /opt/furtka/versions/<ver>/,
and creates /opt/furtka/current as a symlink pointing at it. All runtime
references (Caddy, wrapper, systemd ExecStart) go through /current, so
Phase 2's self-update just flips the symlink atomically.
Systemd units move from hand-written files in /etc/systemd/system/ to
`systemctl link /opt/furtka/current/assets/systemd/*` — one link per
unit, stable across upgrades because the link target is /current. The
furtka-status + furtka-welcome units now ExecStart the shipped scripts
directly from /opt/furtka/current/assets/bin/, which means we no longer
copy those scripts to /usr/local/bin/ at install time.
Runtime JSON (status.json, furtka.json, update-state.json) moves to
/var/lib/furtka/ so self-updates never clobber it. Caddy serves those
three paths from there; everything else from /opt/furtka/current/assets/www/.
The __HOSTNAME__ sed-template hack is gone. At install time we write
/var/lib/furtka/furtka.json with {hostname, install_date, version}, and
the landing page's JS reads it on load to populate the hostname chip
and to build the SMB deep-link for the fileshare tile. First paint gets
a "—" placeholder and hydrates once fetch completes.
Test updates:
- test_webinstaller_assets enforces the new command shape (extract-to-
staging, ln -sfn /opt/furtka/current, systemctl link per unit,
no writes to /srv/furtka/www/).
- test_app's legacy "payload present" / "payload absent" tests match
the new layout too.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Slice 1a of the self-update story. Every HTML/CSS/shell-script/systemd-
unit payload that used to live as a triple-quoted string constant inside
webinstaller/app.py now lives as a real file under furtka/assets/:
furtka/assets/Caddyfile
furtka/assets/VERSION (new — matches pyproject.toml)
furtka/assets/www/{index.html, settings/index.html, style.css, status.json}
furtka/assets/bin/{furtka-status, furtka-welcome}
furtka/assets/systemd/furtka-{api,reconcile,status,welcome}.service
furtka/assets/systemd/furtka-status.timer
The installer now pulls each file from disk via _read_asset(). Byte-for-
byte identical output at install time — a fresh-ISO install should land
the same files in the same places with the same contents, verified by
tests/test_webinstaller_assets.py which reconstructs each base64 blob
and asserts equality against the on-disk asset.
iso/build.sh also copies furtka/assets/ next to the webinstaller source
at /opt/furtka/assets on the live ISO so _resolve_assets_dir() finds
them with a "next to me" lookup. In dev the same function walks two
levels up to the repo copy, so pytest works without any env vars.
furtka-status.sh drops the /etc/furtka/version TODO — it now reads
/opt/furtka/VERSION directly, which Slice 1b will upgrade to
/opt/furtka/current/VERSION once the symlink layout lands.
_FURTKA_WRAPPER_SH (the 5-line /usr/local/bin/furtka shim) stays inline;
it's tiny and not asset-shaped.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
