70 changed files with 130 additions and 2046 deletions
--- a/.forgejo/workflows/build-iso.yml
+++ b/.forgejo/workflows/build-iso.yml
@ -12,7 +12,6 @@ on:
      - '**/*.md'
      - 'docs/**'
      - 'website/**'
      - 'ops/**'
      - 'CHANGELOG.md'
      - 'RELEASING.md'
  workflow_dispatch:
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -7,105 +7,6 @@ This project uses calendar versioning: `YY.N-stage` (e.g. `26.0-alpha` = 2026, r
 ## [Unreleased]
 ### Fixed
 - **Self-update starts newly added timers immediately and links units
  through `current`.** `_link_new_units()` enabled a timer a release
  introduced but never started it, so after the 26.19 → 26.20 update the
  bench sat with `furtka-welcome.timer` `inactive (dead)` — and the console
  banner without its IP line — until the next reboot. It also linked the
  unit from `/opt/furtka/versions/<ver>/…` instead of `/opt/furtka/current/…`,
  so the link would have stopped following later updates and rollbacks
  (installer-created links use `current`). Now: link via `current`, enable,
  start.
 ## [26.20-alpha] - 2026-08-25
 First release shaped by a real-hardware install (old laptop mainboard, BIOS boot,
 SSD with a previous Proxmox VE on it). All four fixes are things an empty
 Proxmox VM never shows.
 ### Fixed
 - **First catalog sync no longer dies silently at boot.** On dual-stack
  LANs `network-online.target` is satisfied by the IPv6 SLAAC address a
  second before DHCPv4 lands, so `furtka-catalog-sync.service` ran into
  `Network is unreachable`, exited, and the next attempt was the daily timer
  — up to 6 h of jitter later. Meanwhile `catalog-state.json` stayed on
  `checking` and the apps page showed "checking…" with nothing running
  (first hardware bench, 2026-08-25). The service now retries on failure
  (every 20 s, up to 8 times in 15 min), a failed sync is recorded as stage
  `error` with the message, and the apps page shows "last sync failed: …"
  instead of a fake in-progress state.
 - **Installer frees the target disk before partitioning.** The live ISO
  auto-activates whatever an attached drive carries (LVM volume groups, md
  arrays, swap) — the first hardware bench's SSD still had a Proxmox VE
  `pve` VG on it — and archinstall then failed at 12 % with `unable to
  inform the kernel of the change, probably because it/they are in use`.
  `install_run` now runs `diskprep.release_disk()` first: swapoff/umount
  leaves-first, `dmsetup remove` / `mdadm --stop` for every dm/md node
  stacked on the disk, `wipefs -a` on partitions + disk, then
  `blockdev --rereadpt`. Every step is written to the top of the install
  log. The progress page also names this failure explicitly instead of a
  bare "hit a snag" if it does still happen.
 - **Console banner always shows the IP fallback.** On both the live ISO and
  the installed system the `/etc/issue` welcome was written once, after
  `network-online.target`, and simply omitted the `http://<ip>` line when no
  address existed yet — so on a slow-DHCP NIC (first hardware bench,
  2026-08-24) the screen only ever offered `proksi.local`. The banner script
  now runs from a timer (`furtka-issue.timer` on the ISO,
  `furtka-welcome.timer` on the installed box, every 5 s) and always prints
  a fallback line: every global IPv4 address once there is one, or a
  "no IP address yet — check the cable / DHCP" hint until then. It only
  rewrites `/etc/issue` and nudges agetty when the text changed, so the
  login prompt doesn't flicker. The live ISO no longer auto-logs `root` in
  on tty1 (releng default) — that handed the console to a shell before the
  banner could update; tty1 now stays at the login prompt with a live
  banner, and the banner tells you a shell is `root` + Enter away. Boxes
  that self-update get the new timer linked + enabled automatically; the
  refresh loop takes effect after their next reboot.
 ## [26.19-alpha] - 2026-08-23
 ### Fixed
 - **App installs now copy subdirectories, so dependency hooks actually
  ship.** `install_from()` only copied an app's top-level files, so the
  `scripts/` folder — where a provider's `on_install`/`on_start` dependency
  hooks live — never reached `/var/lib/furtka/apps/<app>/`, and every hooked
  dependency failed at reconcile with `hook ... missing in provider`. The
  whole app folder is copied now (`rmtree` + `copytree`, so a reinstall also
  drops files that were removed upstream). Found during the first real
  end-to-end run of the mosquitto + zigbee2mqtt pair on a test VM.
 - **`furtka app install <name>` now runs `on_install` hooks.** Named CLI
  installs copied the app folders and then ran a bare reconcile, which fires
  `on_start` but never `on_install` — so a CLI install of a consumer brought
  its provider up without ever provisioning it (no account created, empty
  `MQTT_*` values in the consumer's `.env`). Named installs now go through
  `install_runner.run_install` (writing the plan file first), the same docker
  phase the API dispatches, so providers come up before consumers and
  `on_install` hooks run. Path-based installs keep the copy + reconcile
  dev/test path.
 ## [26.18-alpha] - 2026-06-04
 ### Fixed
 - **`on_start` dependency hooks now receive the consumer's stored
  credentials.** Previously the reconciler handed an `on_start` hook only
  `FURTKA_CONSUMER_APP`/`FURTKA_CONSUMER_VERSION`, so it had no way to learn
  the consumer's existing secrets — which made the feature's own headline use
  case (re-create a provider account, e.g. an MQTT user, after a wipe, with
  the *same* password the consumer already holds) impossible without the
  provider stashing a copy itself. The hook now also gets the consumer's `.env`
  values, namespaced under `FURTKA_CONSUMER_ENV_<KEY>` (only UPPER_SNAKE_CASE
  keys, so a hand-edited `.env` can't produce a malformed `--env` argument).
  `on_start` stays read-only with respect to the consumer: unlike `on_install`,
  its stdout is intentionally not merged back into the consumer's `.env` — it
  reads consumer state to reconcile provider state, it doesn't mutate it.
  Surfaced by building the first real provider/consumer catalog pair
  (mosquitto + zigbee2mqtt) in daniel/furtka-apps.
 ## [26.17-alpha] - 2026-05-11
 ### Added
@ -573,11 +474,7 @@ First tagged snapshot. Pre-alpha — the installer does not yet boot, but the de
 - **Containers:** Docker + Compose
 - **License:** AGPL-3.0
-[Unreleased]: https://forgejo.sourcegate.online/daniel/furtka/compare/26.20-alpha...HEAD
+[Unreleased]: https://forgejo.sourcegate.online/daniel/furtka/compare/26.16-alpha...HEAD
 [26.20-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.20-alpha
 [26.19-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.19-alpha
 [26.18-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.18-alpha
 [26.17-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.17-alpha
 [26.16-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.16-alpha
 [26.15-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.15-alpha
 [26.14-alpha]: https://forgejo.sourcegate.online/daniel/furtka/releases/tag/26.14-alpha
--- a/README.md
+++ b/README.md
@ -102,7 +102,6 @@ None of these nail the "your dad can set this up" experience. The installer wiza
 - [x] Installer webapp prototype — device reader + form → JSON (Robert)
 - [x] Arch running on Proxmox, custom image builds in progress (Robert)
 - [x] Competitor analysis — see [docs/competitors.md](docs/competitors.md)
 - [x] First bare-metal install (old laptop board, BIOS, SSD with a previous Proxmox VE) — 4 bugs found and shipped in 26.20-alpha, report in [docs/hardware-test-2026-08.md](docs/hardware-test-2026-08.md)
 - [x] Wizard flow spec — see [docs/wizard-flow.md](docs/wizard-flow.md)
 - [x] Release process + CI — CalVer tags, conventional commits, Forgejo Actions (ruff, pytest, JSON, link checks), `26.0-alpha` tagged
 - [x] Forgejo runner live on Proxmox VM (`forge-runner-01`, Ubuntu 24.04) — docker-outside-of-docker with host-mode jobs for ISO builds, setup captured in [docs/runner-setup.md](docs/runner-setup.md) + [ops/forgejo-runner/](ops/forgejo-runner/)
--- a/assets/bin/furtka-welcome
+++ b/assets/bin/furtka-welcome
@ -1,36 +1,22 @@
 #!/bin/bash
 # Regenerates /etc/issue on the installed system so the console tells the
-# user which URL to open. Mirrors the live-ISO furtka-update-issue pattern:
+# user which URL to open. Mirrors the live-ISO furtka-update-issue pattern.
-# runs at boot and every few seconds from furtka-welcome.timer, so the IP
+set -e
 # fallback line is always on screen — with the address once DHCP handed one
 # out, or with a "no IP yet" hint before that / after the cable is pulled.
 # Only rewrites + nudges agetty when the text changed (no prompt flicker).
 set -u
-issue=/etc/issue
+hostname=$(cat /etc/hostname)
 ip=$(ip -4 -o addr show scope global 2>/dev/null | awk '{print $4}' | cut -d/ -f1 | head -1)
-hostname=$(cat /etc/hostname 2>/dev/null || hostname)
+{
 mapfile -t ips < <(ip -4 -o addr show scope global 2>/dev/null | awk '{print $4}' | cut -d/ -f1)
 new=$(
    echo
    echo "  Furtka is ready."
    echo
    echo "  Open in a browser on another device on your network:"
    echo
    echo "      http://${hostname}.local   (easy — try this first)"
-    if ((${#ips[@]})); then
+    if [ -n "$ip" ]; then
        for ip in "${ips[@]}"; do
        echo "      http://${ip}   (fallback if the first doesn't work)"
        done
    else
        echo "      (fallback: no IP address yet — waiting for the network."
        echo "       Check the cable / DHCP. This line updates by itself.)"
    fi
    echo
-)
+} > /etc/issue
-if [ "$new" != "$(cat "$issue" 2>/dev/null)" ]; then
+agetty --reload 2>/dev/null || true
    printf '%s\n' "$new" > "$issue"
    agetty --reload 2>/dev/null || true
 fi
--- a/assets/systemd/furtka-catalog-sync.service
+++ b/assets/systemd/furtka-catalog-sync.service
@ -2,20 +2,11 @@
 Description=Furtka apps catalog sync
 Requires=network-online.target
 After=network-online.target
 # network-online.target is satisfied by *any* routable address. On dual-stack
 # LANs that is usually the IPv6 SLAAC address, which lands a second or so
 # before DHCPv4 — and the first sync then dies with "Network is unreachable"
 # (first hardware bench, 2026-08-25). Retry a few times instead of waiting
 # for the daily timer.
 StartLimitIntervalSec=15min
 StartLimitBurst=8
 [Service]
 Type=oneshot
 ExecStart=/usr/local/bin/furtka catalog sync
 TimeoutStartSec=5min
 Restart=on-failure
 RestartSec=20s
 [Install]
 WantedBy=multi-user.target
--- a/assets/systemd/furtka-welcome.service
+++ b/assets/systemd/furtka-welcome.service
@ -1,12 +1,12 @@
 [Unit]
 Description=Furtka console welcome banner
-# No network-online dependency on purpose: paint the banner (with a
+After=network-online.target
-# "no IP yet" fallback) as early as possible; furtka-welcome.timer re-runs
+Wants=network-online.target
 # it every few seconds so the address appears as soon as DHCP delivers.
 [Service]
 Type=oneshot
 ExecStart=/opt/furtka/current/assets/bin/furtka-welcome
 RemainAfterExit=yes
 [Install]
 WantedBy=multi-user.target
--- a/assets/systemd/furtka-welcome.timer
+++ b/assets/systemd/furtka-welcome.timer
@ -1,10 +0,0 @@
 [Unit]
 Description=Keep the Furtka console welcome (IP fallback) up to date
 [Timer]
 OnBootSec=3s
 OnUnitActiveSec=5s
 AccuracySec=1s
 [Install]
 WantedBy=timers.target
--- a/docs/hardware-test-2026-08.md
+++ b/docs/hardware-test-2026-08.md
@ -1,75 +0,0 @@
 # Hardware test report — "junk bench", 2026-08-24/26
 First end-to-end run of Furtka on real hardware that was not a Proxmox VM
 and not the Medion box: a bare old-laptop mainboard lying on the desk, a
 1 TB Crucial BX SATA SSD that had previously lived in a Proxmox VE host, a
 USB hub for keyboard + boot stick, LAN cable, HDMI monitor. Tester: Daniel.
 Release under test: **26.19-alpha**, then self-updated to **26.20-alpha**.
 Why it mattered: every bug below is invisible on the smoke VM. A VM has a
 fresh empty disk, a fast virtual NIC, UEFI firmware and no USB stick to pull.
 ## Timeline
 | When | What happened | Outcome |
 |---|---|---|
 | 08-24 | ISO flashed with Fedora Media Writer, bench booted, browser opened `proski.local:5000` | "Server Not Found" — **typo** (`proski` vs `proksi`). Bench powered off. |
 | 08-25 | `proksi.local:5000` — wizard came up (BIOS/syslinux boot path, stock Arch splash) | OK |
 | 08-25 13:07 | Install run 1 | **Failed at 12 %**: `Partition(s) 2, 3 on /dev/sda have been written, but we have been unable to inform the kernel of the change … in use` |
 | 08-25 | Root shell over SSH (`passwd` + `ssh-copy-id` on the live ISO): SSD still carried a Proxmox VE `pve` volume group (swap, root, thin pool); udev had activated it, six device-mapper nodes sat on `sda3` | Cleared by hand: `dmsetup remove` ×6, `wipefs -a /dev/sda`, `blockdev --rereadpt` |
 | 08-25 13:16 | Install run 2 | `Installation completed without any errors`; BIOS detected → `Grub`, MBR table, `sda1` 1 G vfat `/boot`, `sda2` ext4 `/` |
 | 08-25 | "Reboot now" clicked | Box **booted the USB stick again** (BIOS order). Stick pulled, rebooted → `furtka.local` = 192.168.178.142, Caddy answering |
 | 08-25 16:22 | First boot of the installed system | `furtka-catalog-sync.service` failed: `Network is unreachable`. `network-online.target` had fired on the IPv6 SLAAC address ~1 s before DHCPv4 landed. State file stuck on `checking`, apps page empty; next timer run would have been 18:26 |
 | 08-25 ~17:00 | Catalog synced via the "Sync apps catalog" button | Catalog 26.13-alpha, 7 apps listed |
 | 08-25 17:47 | 26.20-alpha released with the fixes below | Box reports `Update available: 26.19-alpha → 26.20-alpha` |
 | 08-26 09:34 | Self-update to 26.20-alpha from `/settings` | `current → 26.20-alpha`, no failed units. **New finding:** `furtka-welcome.timer` linked + enabled by the updater but `inactive (dead)` — `enable` alone only arms it for the next boot |
 ## Findings and fixes
 | # | Finding | Root cause | Fix | Shipped in | Validated on hardware |
 |---|---|---|---|---|---|
 | 1 | Console banner showed only `proksi.local` / `furtka.local`, never the IP fallback | Banner script was a oneshot after `network-online.target` and dropped the IP line when no address existed yet. On the live ISO releng's root autologin on tty1 also made `agetty --reload` a no-op | `furtka-issue.timer` (ISO) / `furtka-welcome.timer` (installed) re-run the script every 5 s; fallback line is always present ("no IP address yet — check the cable / DHCP" until one arrives); ISO no longer auto-logs root in on tty1 | 26.20-alpha (`0e05bef`) | Installed side: pending reboot or next update. ISO side: pending reinstall from the 26.20 ISO |
 | 2 | Install failed at partitioning on a disk with a previous OS | Live ISO ships lvm2/mdadm/dmraid/cryptsetup; udev auto-activates whatever the disk carries; parted cannot re-read the partition table while dm nodes hold the partitions | `webinstaller/diskprep.py`: `release_disk()` runs before archinstall — swapoff/umount leaves-first, `dmsetup remove` / `mdadm --stop`, `wipefs -a`, `blockdev --rereadpt`; steps logged at the top of the install log; progress page names this failure explicitly | 26.20-alpha (`5ddda53`) | Pending reinstall from the 26.20 ISO (the disk now carries Furtka itself, which exercises the same path minus LVM) |
 | 3 | "Remove the USB stick" was easy to miss — the box booted the installer again | Hint lived on the *rebooting* page and in a `confirm()` popup, i.e. after the click, with the machine restarting 3 s later | Done state shows a two-step list (pull the stick → restart) above the button; button reads "USB stick is out — restart now" | 26.20-alpha (`60404ae`) | Pending reinstall |
 | 4 | No apps after first boot | Boot-time catalog sync raced DHCPv4 (IPv6 made `network-online` fire early), no retry, timer jitter pushed the next attempt 2 h out, state file stuck on `checking` | `furtka-catalog-sync.service` retries on failure (20 s, up to 8× in 15 min); failures recorded as stage `error`; apps page shows "last sync failed: …" | 26.20-alpha (`32ba522`) | Retry config confirmed live on the box after the update; a cold boot with the new unit is still pending |
 | 5 | New timer dead after self-update | `_link_new_units()` linked + enabled but never started the timer; also linked from the versioned dir instead of `current` | Link via `current`, enable, start | Unreleased (this branch) | — |
 Not a bug, but worth knowing: on this board the BIOS boots the USB stick
 before the SSD, so every reinstall needs the stick pulled at the reboot
 prompt. The stock Arch splash on the BIOS/syslinux boot path is unbranded
 (only menu labels are) — cosmetic.
 ## What worked first time
 - Fedora Media Writer → hybrid ISO boots on BIOS firmware.
 - mDNS: `proksi.local` (live ISO) and `furtka.local` (installed) resolved
  from a Fedora client once spelled correctly.
 - BIOS detection → `Grub` + MBR layout; the installed system booted from
  the SSD without intervention.
 - Login, `/settings`, catalog sync via the UI button, `furtka update --check`,
  self-update 26.19 → 26.20 with symlink flip and clean unit state.
 - Time sync, Docker 29.7.2, Caddy on :80, sshd with key auth for the wizard
  user (`wheel` + `docker` groups as configured).
 ## Still open from this run
 - Reinstall from the 26.20-alpha ISO on the bench to validate findings 1–3
  on the ISO side (the installed side of #1 validates on the next reboot).
 - Cold boot with the retrying catalog-sync unit (#4) on a dual-stack LAN.
 - Rebrand the syslinux boot splash.
 - `smoke-latest.yml` is `workflow_dispatch` only and has not run since
  April; the smoke VM would not have caught any of the above anyway, but it
  is currently not running at all.
 ## Reproducing the bench conditions in a VM
 Most of this can be provoked on Proxmox if you want a regression check
 without the hardware:
 - Finding 2: attach a disk that already carries an LVM install (e.g. a
  spare Proxmox VE or Ubuntu LVM disk image) before booting the ISO.
 - Finding 3: leave the ISO attached as CD-ROM with boot order CD-first.
 - Finding 4: give the VM's bridge IPv6 RA before DHCPv4 — harder; the
  retry logic is unit-tested instead.
 - Finding 1: use SeaBIOS instead of OVMF (the README notes SeaBIOS fails on
  `ldlinux.c32` from this ISO, so this one really needs hardware).
--- a/furtka/api.py
+++ b/furtka/api.py
@ -490,11 +490,7 @@ async function refreshCatalog() {
  const updatedAt = (status.state || {}).updated_at || '';
  document.getElementById('catalog-last-sync').textContent = updatedAt || 'never';
  const stageEl = document.getElementById('catalog-stage');
-  if (stage === 'error') {
+  if (stage && stage !== 'done') {
    const err = (status.state || {}).error || 'unknown error';
    stageEl.textContent = '· last sync failed: ' + err;
    stageEl.classList.add('pending');
  } else if (stage && stage !== 'done') {
    stageEl.textContent = '· ' + stage + '…';
    stageEl.classList.add('pending');
  } else {
--- a/furtka/catalog.py
+++ b/furtka/catalog.py
@ -204,21 +204,8 @@ def _atomic_swap(staging: Path) -> None:
 def sync_catalog() -> CatalogCheck:
    """End-to-end sync. Acquires the lock, writes state at each stage, and
    leaves the live catalog untouched on any failure before the rename step.
    A failure lands as stage ``"error"`` (with the message) instead of leaving
    the last in-flight stage behind: the first hardware bench sat on
    ``"checking"`` for hours after a boot-time network failure, and the UI
    showed "checking…" with nothing actually happening.
    """
    with acquire_lock():
        try:
            return _sync_locked()
        except CatalogError as e:
            write_state("error", error=str(e))
            raise
 def _sync_locked() -> CatalogCheck:
        write_state("checking")
        check = check_catalog()
        if not check.update_available:
--- a/furtka/cli.py
+++ b/furtka/cli.py
@ -69,62 +69,37 @@ def _cmd_app_list(args: argparse.Namespace) -> int:
 def _cmd_app_install(args: argparse.Namespace) -> int:
    # If the user passed a path (or a path-ish thing), bypass dep resolution —
    # local paths are dev/test workflows where the caller knows what they want.
-    # These just copy + reconcile; no `requires`/hook handling.
+    # Catalog/bundled name installs go through plan_install() so transitive
    # `requires` are pulled in.
    src_path = Path(args.source)
    is_path = src_path.is_dir() or "/" in args.source or args.source.startswith(".")
    if is_path:
    try:
        if is_path:
            src = installer.resolve_source(args.source)
            target = installer.install_from(src)
        except installer.InstallError as e:
            print(f"error: {e}", file=sys.stderr)
            return 2
            print(f"installed {target.name} to {target}")
-        actions = reconciler.reconcile(apps_dir())
+        else:
        for a in actions:
            print(f"  {a.describe()}")
        return 1 if reconciler.has_errors(actions) else 0
    # Catalog/bundled name install: resolve transitive `requires`, copy every
    # app folder (the synchronous phase the API runs inline), then drive the
    # exact same docker phase the API dispatches via systemd-run — so providers
    # come up before consumers and `on_install` hooks fire to provision them.
    # Going through run_install (not a bare reconcile) is what makes a CLI
    # install of a consumer actually provision against its provider.
    from furtka import install_runner
            try:
                plan = deps.plan_install(args.source)
            except deps.DependencyError as e:
                print(f"error: {e}", file=sys.stderr)
                return 2
-    try:
+            if not plan.to_install:
-        if plan.to_install:
+                # Target is already installed — re-run as a single-app install
-            installer.install_plan(plan)
+                # to refresh files (matches reinstall semantics).
-            to_install = list(plan.to_install)
+                target_path = installer.install_from(installer.resolve_source(args.source))
                print(f"reinstalled {target_path.name} to {target_path}")
            else:
-            # Target already installed — reinstall to refresh files, then still
+                targets = installer.install_plan(plan)
-            # run the docker phase so hooks re-fire (matches API reinstall).
+                for t in targets:
-            installer.install_from(installer.resolve_source(args.source))
+                    print(f"installed {t.name} to {t}")
            to_install = [args.source]
    except installer.InstallError as e:
        print(f"error: {e}", file=sys.stderr)
        return 2
-
+    actions = reconciler.reconcile(apps_dir())
-    # Stage the plan file run_install consumes (it removes it after reading).
+    for a in actions:
-    install_runner.plan_path().parent.mkdir(parents=True, exist_ok=True)
+        print(f"  {a.describe()}")
-    install_runner.plan_path().write_text(
+    return 1 if reconciler.has_errors(actions) else 0
        json.dumps({"target": args.source, "to_install": to_install})
    )
    try:
        install_runner.run_install(args.source)
    except Exception as e:
        # run_install already wrote state="error"; surface it to the caller.
        print(f"error: {e}", file=sys.stderr)
        return 1
    for name in to_install:
        print(f"installed {name}")
    return 0
 def _cmd_app_install_bg(args: argparse.Namespace) -> int:
--- a/furtka/installer.py
+++ b/furtka/installer.py
@ -171,22 +171,13 @@ def install_from(src: Path, settings: dict[str, str] | None = None) -> Path:
    target.mkdir(parents=True, exist_ok=True)
    for item in src.iterdir():
        dest = target / item.name
        # Subdirectories (e.g. scripts/ holding a provider's on_install/on_start
        # dependency hooks) must come along too — copy the whole tree, replacing
        # any stale copy from a previous install so removed files don't linger.
        if item.is_dir():
            if dest.exists():
                shutil.rmtree(dest)
            shutil.copytree(item, dest)
            continue
        if not item.is_file():
            continue
        # Never overwrite an existing user .env — either settings-driven write
        # or previous manual edit has authority.
        if item.name == ".env" and (target / ".env").exists():
            continue
-        shutil.copy2(item, dest)
+        shutil.copy2(item, target / item.name)
    env = target / ".env"
    env_example = target / ".env.example"
--- a/furtka/reconciler.py
+++ b/furtka/reconciler.py
@ -1,17 +1,12 @@
 from dataclasses import dataclass
 from pathlib import Path
-from furtka import deps, dockerops, installer
+from furtka import deps, dockerops
-from furtka.manifest import SETTING_NAME_RE, ManifestError, load_manifest
+from furtka.manifest import ManifestError, load_manifest
 from furtka.scanner import scan
 _ON_START_TIMEOUT_SECONDS = 30.0
 # Consumer .env values are exported into an on_start hook's environment under
 # this prefix. Namespaced so a consumer setting named PATH/HOME/etc. can't
 # clobber the provider container's own environment when the hook runs.
 _CONSUMER_ENV_PREFIX = "FURTKA_CONSUMER_ENV_"
@dataclass(frozen=True)
 class Action:
@ -111,33 +106,13 @@ def _fire_on_start_hook(consumer, req, apps_root: Path) -> None:
        req.app,
        service,
        hook_abs,
-        env=_on_start_hook_env(consumer, apps_root),
+        env={
            "FURTKA_CONSUMER_APP": consumer.name,
            "FURTKA_CONSUMER_VERSION": consumer.version,
        },
        timeout=_ON_START_TIMEOUT_SECONDS,
    )
 def _on_start_hook_env(consumer, apps_root: Path) -> dict[str, str]:
    """Build the environment handed to an on_start hook.
    Beyond the consumer's name/version, this injects the consumer's stored
    `.env` values (namespaced under `FURTKA_CONSUMER_ENV_`) so the hook can
    re-establish provider-side state *idempotently* — e.g. re-create an MQTT
    account with the SAME password the consumer already holds. The reconciler
    does not merge an on_start hook's stdout back into the consumer's `.env`
    (unlike on_install): on_start reads consumer state, it doesn't mutate it.
    Only UPPER_SNAKE_CASE keys are injected so a hand-edited `.env` can't
    produce a malformed `docker compose exec --env` argument.
    """
    env = {
        "FURTKA_CONSUMER_APP": consumer.name,
        "FURTKA_CONSUMER_VERSION": consumer.version,
    }
    consumer_env = installer.read_env_values(apps_root / consumer.name / ".env")
    for key, value in consumer_env.items():
        if SETTING_NAME_RE.match(key):
            env[f"{_CONSUMER_ENV_PREFIX}{key}"] = value
    return env
 def has_errors(actions: list[Action]) -> bool:
    return any(a.kind == "error" for a in actions)
--- a/furtka/updater.py
+++ b/furtka/updater.py
@ -226,17 +226,12 @@ def _link_new_units(unit_dir: Path) -> list[str]:
    """`systemctl link` any unit file in unit_dir that isn't already symlinked
    into /etc/systemd/system/. Returns the list of newly-linked unit names.
-    Newly-linked `.timer` units are additionally `systemctl enable`d *and
+    Newly-linked `.timer` units are additionally `systemctl enable`d so that
-    started* so that a self-update introducing a timer (e.g. 26.5 → 26.6
+    a self-update introducing a timer (e.g. 26.5 → 26.6 adding
-    adding furtka-catalog-sync.timer, 26.19 → 26.20 adding
+    furtka-catalog-sync.timer) activates it automatically — the installer's
-    furtka-welcome.timer) activates it right away — the installer's enable
+    enable list only applies to fresh installs. A linked-but-disabled timer
-    list only applies to fresh installs, and `enable` alone only takes
+    never fires on its own, so without this step catalog sync would never
-    effect at the next boot (the bench sat on a dead welcome timer after the
+    happen on upgraded boxes.
    26.20 update).
    Units are linked through the `/opt/furtka/current` symlink, not the
    versioned directory that `unit_dir` scans, so the link keeps following
    later updates and rollbacks the same way the installer-created links do.
    """
    if not unit_dir.is_dir():
        return []
@ -247,10 +242,9 @@ def _link_new_units(unit_dir: Path) -> list[str]:
        target = _SYSTEMD_DIR / unit_file.name
        if target.exists() or target.is_symlink():
            continue
-        _run(["systemctl", "link", str(current_symlink() / "assets" / "systemd" / unit_file.name)])
+        _run(["systemctl", "link", str(unit_file)])
        if unit_file.suffix == ".timer":
            _run(["systemctl", "enable", unit_file.name])
            _run(["systemctl", "start", unit_file.name])
        linked.append(unit_file.name)
    return linked
--- a/iso/README.md
+++ b/iso/README.md
@ -27,15 +27,13 @@ The build starts from Arch's stock `releng` profile (the same one used to build
 | `overlay/airootfs/opt/furtka/`               | Directory where `webinstaller/` is copied at build time                          |
 | `overlay/airootfs/etc/hostname`              | Live-ISO hostname (`proksi`) so mDNS advertises the installer as `proksi.local`  |
 | `overlay/airootfs/etc/issue`                 | Welcome banner on the TTY pointing users at `http://proksi.local:5000`           |
-| `overlay/airootfs/usr/local/bin/furtka-update-issue` | Rewrites `/etc/issue` at runtime so the banner always carries a fallback line: the DHCP-assigned IP(s), or a "no IP yet — check cable / DHCP" hint until one arrives. Only touches the file (and `agetty --reload`s) when the text changed |
+| `overlay/airootfs/usr/local/bin/furtka-update-issue` | Rewrites `/etc/issue` at runtime so the banner also shows the DHCP-assigned IP as a fallback URL |
-| `overlay/airootfs/etc/systemd/system/`       | `furtka-webinstaller.service` (Flask on :5000) + `furtka-issue.service` (banner-updater, first run at boot) in `multi-user.target.wants/`, and `furtka-issue.timer` (re-runs the updater every 5 s) in `timers.target.wants/` |
+| `overlay/airootfs/etc/systemd/system/`       | `furtka-webinstaller.service` (Flask on :5000) + `furtka-issue.service` (runs the banner-updater on network-online), each symlinked into `multi-user.target.wants/` to auto-start on boot |
 The systemd service runs `flask --app app run --host 0.0.0.0 --port 5000` under `/opt/furtka`. The `0.0.0.0` binding is important — the Flask default is localhost-only, which wouldn't be reachable from another machine on the LAN.
 mDNS is wired: `avahi-daemon` + `nss-mdns` come from `packages.extra`, the live ISO's hostname is `proksi`, and as soon as `systemd-networkd-wait-online` fires the installer is reachable at `http://proksi.local:5000`. The raw IP still shows on the console for fallback — some Windows clients need the Bonjour service for `.local` to resolve at all.
 `build.sh` also deletes releng's `getty@tty1.service.d/autologin.conf`. With root auto-logged-in, tty1 belongs to a shell and `agetty --reload` can't redraw the banner, so the IP line was a snapshot of whatever DHCP had done by the time getty started. Without autologin tty1 sits at the login prompt showing the live banner; for a shell type `root` + Enter (releng's root has no password) — the banner says so.
 ## Test flow
 1. Build: `./iso/build.sh`
@ -51,27 +49,6 @@ mDNS is wired: `avahi-daemon` + `nss-mdns` come from `packages.extra`, the live
 5. Find its IP in Proxmox's VM summary (or your router's DHCP table)
 6. Open `http://<vm-ip>:5000` — the existing 3-screen wizard should be there
 ## Real hardware (what differs from the VM flow)
 Learned on the first bare-metal run, see [docs/hardware-test-2026-08.md](../docs/hardware-test-2026-08.md):
 - **BIOS boxes work.** The hybrid ISO boots via syslinux on legacy firmware
  (you'll see the stock Arch splash — only the menu labels are branded), and
  the installer detects the missing `/sys/firmware/efi` and picks GRUB + MBR.
 - **Pull the USB stick before "restart now".** Most BIOSes boot USB before
  the disk; the done page says so above the button since 26.20-alpha.
 - **Disks with a previous OS are fine since 26.20-alpha.** The live ISO
  auto-activates old LVM/RAID/swap; `webinstaller/diskprep.py` releases the
  disk before archinstall partitions it. On 26.19 and earlier you'd hit
  `unable to inform the kernel of the change … in use` at 12 % — clear it
  from the tty1 root shell with `dmsetup remove <node>` for every dm node
  shown by `lsblk`, then `wipefs -a /dev/sdX` and retry.
 - **Slow NICs.** The console banner's IP fallback line is timer-driven
  since 26.20-alpha; on 26.19 it only appeared if DHCP beat getty.
 - **Shell on the live ISO**: since 26.20-alpha tty1 stays at the login
  prompt (banner refreshes live); log in as `root`, no password. sshd runs;
  set a root password with `passwd` to reach it over the network.
 ## What you see after install + reboot
 Once `archinstall` finishes and you click **Reboot now**, the VM comes up into the installed system. No more port `:5000` — the wizard ISO is gone. Instead:
--- a/iso/build.sh
+++ b/iso/build.sh
@ -45,15 +45,6 @@ cat "$SCRIPT_DIR/overlay/profiledef.sh" >> "$PROFILE_WORK/profiledef.sh"
 cp -a "$SCRIPT_DIR/overlay/airootfs/." "$PROFILE_WORK/airootfs/"
 # releng auto-logs root in on tty1. That turns our /etc/issue banner into a
 # one-shot snapshot: once agetty has handed tty1 to a shell, `agetty --reload`
 # from furtka-update-issue has nothing left to redraw, so the IP fallback only
 # shows if DHCP happened to beat getty. Drop the drop-in: tty1 stays at the
 # login prompt with a live-refreshed banner (furtka-issue.timer), and a shell
 # is one `root` + Enter away (releng's root has no password) — the banner says
 # so.
 rm -rf "$PROFILE_WORK/airootfs/etc/systemd/system/getty@tty1.service.d"
 echo "==> Rebranding boot menu (GRUB + syslinux + systemd-boot)"
 # releng ships menu entries labelled "Arch Linux install medium" across three
 # bootloader configs (BIOS syslinux, GRUB, systemd-boot for UEFI). Rewrite to
--- a/iso/overlay/airootfs/etc/issue
+++ b/iso/overlay/airootfs/etc/issue
@ -2,6 +2,5 @@
  Furtka Live Installer starting…
  Once ready, open http://proksi.local:5000 on another device
-  on your network. The exact URL (and an IP fallback) will
+  on your network. The exact URL will appear below.
  appear here in a few seconds.
--- a/iso/overlay/airootfs/etc/systemd/system/furtka-issue.service
+++ b/iso/overlay/airootfs/etc/systemd/system/furtka-issue.service
@ -1,12 +1,12 @@
 [Unit]
 Description=Write Furtka /etc/issue with current IP for the console welcome
-# No network-online dependency on purpose: the first run should paint the
+After=network-online.target
-# banner (with a "no IP yet" fallback) as early as possible; the timer
+Wants=network-online.target
 # re-runs it until an address shows up.
 [Service]
 Type=oneshot
 ExecStart=/usr/local/bin/furtka-update-issue
 RemainAfterExit=yes
 [Install]
 WantedBy=multi-user.target
--- a/iso/overlay/airootfs/etc/systemd/system/furtka-issue.timer
+++ b/iso/overlay/airootfs/etc/systemd/system/furtka-issue.timer
@ -1,10 +0,0 @@
 [Unit]
 Description=Keep the Furtka console welcome (IP fallback) up to date
 [Timer]
 OnBootSec=3s
 OnUnitActiveSec=5s
 AccuracySec=1s
 [Install]
 WantedBy=timers.target
--- a/iso/overlay/airootfs/etc/systemd/system/timers.target.wants/furtka-issue.timer
+++ b/iso/overlay/airootfs/etc/systemd/system/timers.target.wants/furtka-issue.timer
@ -1 +0,0 @@
 ../furtka-issue.timer
--- a/iso/overlay/airootfs/usr/local/bin/furtka-update-issue
+++ b/iso/overlay/airootfs/usr/local/bin/furtka-update-issue
@ -2,40 +2,22 @@
 # Regenerates /etc/issue so the live-ISO console tells the user which URL
 # to open in their browser. Shows proksi.local (via avahi/mDNS) as the
 # preferred URL and the raw IP as a fallback for networks where mDNS
-# doesn't work.
+# doesn't work. Reload at the end nudges agetty to redraw.
-#
+set -e
 # Runs at boot and then every few seconds from furtka-issue.timer, so the
 # fallback line is *always* on screen: with the address once DHCP has
 # handed one out, or with a "no IP yet" hint before that / when the cable
 # is unplugged. Only rewrites + nudges agetty when the text actually
 # changed, so the login prompt doesn't flicker on every tick.
 set -u
-issue=/etc/issue
+ip=$(ip -4 -o addr show scope global 2>/dev/null | awk '{print $4}' | cut -d/ -f1 | head -1)
-mapfile -t ips < <(ip -4 -o addr show scope global 2>/dev/null | awk '{print $4}' | cut -d/ -f1)
+{
 new=$(
    echo
    echo "  Open Furtka in a browser on another device on your network:"
    echo
    echo "      http://proksi.local:5000   (easy — try this first)"
-    if ((${#ips[@]})); then
+    if [ -n "$ip" ]; then
        for ip in "${ips[@]}"; do
        echo "      http://${ip}:5000   (fallback if the first doesn't work)"
        done
    else
        echo "      (fallback: no IP address yet — waiting for the network."
        echo "       Check the cable / DHCP. This line updates by itself.)"
    fi
    echo
    echo "  Then follow the wizard to install Furtka on this machine."
    echo
-    echo "  Need a shell? Log in as root (no password)."
+} > /etc/issue
    echo
 )
-if [ "$new" != "$(cat "$issue" 2>/dev/null)" ]; then
+agetty --reload 2>/dev/null || true
    printf '%s\n' "$new" > "$issue"
    agetty --reload 2>/dev/null || true
 fi
--- a/ops/nginx/furtka.org.conf
+++ b/ops/nginx/furtka.org.conf
@ -29,22 +29,6 @@ server {
        try_files $uri $uri/ $uri.html =404;
    }
    # Poll counter (ops/poll/pollsvc.py) — cookie-free, rate-limited.
    location /api/poll/ {
        # Public traffic arrives from the edge proxy via 192.168.178.164.
        # Only that hop is trusted when unwinding X-Forwarded-For, so a
        # client-supplied X-Forwarded-For cannot forge a fresh "device".
        set_real_ip_from 192.168.178.164;
        real_ip_header X-Forwarded-For;
        real_ip_recursive on;
        limit_req zone=poll burst=10 nodelay;
        proxy_pass http://127.0.0.1:8090/;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header User-Agent $http_user_agent;
        proxy_read_timeout 5s;
    }
    location = /favicon.svg {
        access_log off;
        log_not_found off;
--- a/ops/nginx/poll-ratelimit.conf
+++ b/ops/nginx/poll-ratelimit.conf
@ -1,2 +0,0 @@
 # Rate limit for the poll API (http context; included from conf.d).
 limit_req_zone $binary_remote_addr zone=poll:1m rate=30r/m;
--- a/ops/nginx/setup-vm.sh
+++ b/ops/nginx/setup-vm.sh
@ -16,7 +16,6 @@ install -d -o "$OWNER" -g "$OWNER" -m 0755 "$WEBROOT"
 install -d -o "$OWNER" -g "$OWNER" -m 0755 "$SRCROOT"
 cp "$(dirname "$0")/furtka.org.conf" "$SITE_CONF"
 cp "$(dirname "$0")/poll-ratelimit.conf" /etc/nginx/conf.d/poll-ratelimit.conf
 ln -sfn "$SITE_CONF" "$SITE_LINK"
 # Drop the Ubuntu default site so it doesn't shadow us on :80.
--- a/ops/poll/furtka-poll.service
+++ b/ops/poll/furtka-poll.service
@ -1,17 +0,0 @@
 [Unit]
 Description=furtka.org poll counter
 After=network.target
 [Service]
 ExecStart=/usr/bin/python3 /opt/furtka-poll/pollsvc.py
 DynamicUser=yes
 StateDirectory=furtka-poll
 Restart=on-failure
 RestartSec=3
 NoNewPrivileges=yes
 ProtectSystem=strict
 ProtectHome=yes
 PrivateTmp=yes
 [Install]
 WantedBy=multi-user.target
--- a/ops/poll/pollsvc.py
+++ b/ops/poll/pollsvc.py
@ -1,172 +0,0 @@
 #!/usr/bin/env python3
 """Tiny cookie-free poll counter for furtka.org.
 Runs behind nginx on 127.0.0.1:8090. One SQLite file, no dependencies
 beyond the standard library.
    GET  /<poll>          -> {"poll": "logo", "counts": {"m": 3, "r": 5}, "total": 8}
    POST /<poll>          -> body {"choice": "m"}; answers like GET plus "yours"
 A device is identified by a salted SHA-256 of client IP (as resolved by
 nginx from the trusted edge proxy) + User-Agent, so nobody needs a cookie
 and the raw address is never stored. Voting again
 from the same device changes the vote instead of adding one.
 """
 import hashlib
 import json
 import logging
 import os
 import sqlite3
 import sys
 import threading
 from http.server import BaseHTTPRequestHandler, ThreadingHTTPServer
 POLLS = {
    "logo": ("m", "r"),
 }
 STATE_DIR = os.environ.get("STATE_DIRECTORY", "/var/lib/furtka-poll")
 DB_PATH = os.path.join(STATE_DIR, "votes.db")
 SALT_PATH = os.path.join(STATE_DIR, "salt")
 LISTEN = os.environ.get("POLL_LISTEN", "127.0.0.1")
 PORT = int(os.environ.get("POLL_PORT", "8090"))
 MAX_BODY = 512
 log = logging.getLogger("pollsvc")
 _lock = threading.Lock()
 def _salt() -> bytes:
    try:
        with open(SALT_PATH, "rb") as f:
            s = f.read()
            if len(s) >= 16:
                return s
    except FileNotFoundError:
        pass
    s = os.urandom(32)
    with open(SALT_PATH, "wb") as f:
        f.write(s)
    os.chmod(SALT_PATH, 0o600)
    return s
 def _db() -> sqlite3.Connection:
    conn = sqlite3.connect(DB_PATH, check_same_thread=False)
    conn.execute(
        "CREATE TABLE IF NOT EXISTS votes ("
        " poll TEXT NOT NULL, device TEXT NOT NULL, choice TEXT NOT NULL,"
        " ts INTEGER NOT NULL DEFAULT (unixepoch()),"
        " PRIMARY KEY (poll, device))"
    )
    conn.commit()
    return conn
 SALT = None
 CONN = None
 def counts(poll: str) -> dict:
    with _lock:
        rows = CONN.execute(
            "SELECT choice, COUNT(*) FROM votes WHERE poll=? GROUP BY choice", (poll,)
        ).fetchall()
    c = {k: 0 for k in POLLS[poll]}
    for choice, n in rows:
        if choice in c:
            c[choice] = n
    return {"poll": poll, "counts": c, "total": sum(c.values())}
 class Handler(BaseHTTPRequestHandler):
    server_version = "furtka-poll/1"
    def log_message(self, fmt, *args):  # quiet; nginx has the access log
        log.debug(fmt, *args)
    def _client_ip(self) -> str:
        # nginx resolves the trusted proxy chain (real_ip module, see
        # ops/nginx/furtka.org.conf) and hands us the result as X-Real-IP.
        # We never parse X-Forwarded-For here: its leading entries are
        # whatever the client chose to send.
        return self.headers.get("X-Real-IP") or self.client_address[0]
    def _device(self) -> str:
        ua = self.headers.get("User-Agent", "")
        h = hashlib.sha256(SALT + self._client_ip().encode() + b"|" + ua.encode())
        return h.hexdigest()[:32]
    def _json(self, status: int, payload: dict):
        body = json.dumps(payload).encode()
        self.send_response(status)
        self.send_header("Content-Type", "application/json; charset=utf-8")
        self.send_header("Content-Length", str(len(body)))
        self.send_header("Cache-Control", "no-store")
        self.end_headers()
        self.wfile.write(body)
    def _poll(self):
        name = self.path.strip("/").split("?")[0]
        if name not in POLLS:
            self._json(404, {"error": "no such poll"})
            return None
        return name
    def do_GET(self):
        poll = self._poll()
        if not poll:
            return
        payload = counts(poll)
        with _lock:
            row = CONN.execute(
                "SELECT choice FROM votes WHERE poll=? AND device=?", (poll, self._device())
            ).fetchone()
        payload["yours"] = row[0] if row else None
        self._json(200, payload)
    def do_POST(self):
        poll = self._poll()
        if not poll:
            return
        try:
            n = int(self.headers.get("Content-Length", "0"))
            if n > MAX_BODY:
                raise ValueError("body too large")
            data = json.loads(self.rfile.read(n) or b"{}")
            choice = str(data.get("choice", ""))
        except (ValueError, json.JSONDecodeError):
            self._json(400, {"error": "bad request"})
            return
        if choice not in POLLS[poll]:
            self._json(400, {"error": "unknown choice"})
            return
        with _lock:
            CONN.execute(
                "INSERT INTO votes (poll, device, choice) VALUES (?,?,?)"
                " ON CONFLICT(poll, device) DO UPDATE SET choice=excluded.choice, ts=unixepoch()",
                (poll, self._device(), choice),
            )
            CONN.commit()
        payload = counts(poll)
        payload["yours"] = choice
        self._json(200, payload)
 def main():
    global SALT, CONN
    logging.basicConfig(
        level=os.environ.get("POLL_LOGLEVEL", "INFO"),
        stream=sys.stderr,
        format="%(levelname)s %(message)s",
    )
    os.makedirs(STATE_DIR, exist_ok=True)
    SALT = _salt()
    CONN = _db()
    srv = ThreadingHTTPServer((LISTEN, PORT), Handler)
    log.info("listening on %s:%d, db %s", LISTEN, PORT, DB_PATH)
    srv.serve_forever()
 if __name__ == "__main__":
    main()
--- a/ops/poll/setup-poll.sh
+++ b/ops/poll/setup-poll.sh
@ -1,26 +0,0 @@
 #!/usr/bin/env bash
 # Install / update the poll counter on forge-runner-01. Idempotent.
 #
 # Usage (on the VM, with sudo):
 #   sudo ops/poll/setup-poll.sh            # install / update
 #   sudo ops/poll/setup-poll.sh --reset    # ... and wipe all votes
 set -euo pipefail
 HERE="$(cd "$(dirname "$0")" && pwd)"
 if [ "${1:-}" = "--reset" ]; then
  systemctl stop furtka-poll 2>/dev/null || true
  rm -f /var/lib/furtka-poll/votes.db
  echo "votes wiped"
 fi
 install -d -m 0755 /opt/furtka-poll
 install -m 0644 "$HERE/pollsvc.py" /opt/furtka-poll/pollsvc.py
 install -m 0644 "$HERE/furtka-poll.service" /etc/systemd/system/furtka-poll.service
 systemctl daemon-reload
 systemctl enable --now furtka-poll
 systemctl restart furtka-poll
 sleep 1
 systemctl --no-pager --lines=3 status furtka-poll
 curl -fsS http://127.0.0.1:8090/logo && echo
 echo "OK: furtka-poll running on 127.0.0.1:8090"
--- a/pyproject.toml
+++ b/pyproject.toml
@ -1,6 +1,6 @@
 [project]
 name = "furtka"
-version = "26.20-alpha"
+version = "26.17-alpha"
 description = "Open-source home server OS — simple enough for everyone."
 requires-python = ">=3.11"
 readme = "README.md"
--- a/tests/test_app.py
+++ b/tests/test_app.py
@ -195,34 +195,3 @@ def test_build_archinstall_creds_uses_archinstall_sentinel_keys():
            "groups": [],
        }
    ]
 def test_log_page_done_state_shows_usb_step_before_restart(monkeypatch, tmp_path):
    """The 'pull the USB stick' step must be visible *before* the restart
    button — after the click the box reboots within seconds (first hardware
    bench booted the stick again)."""
    import app as app_module
    log_path = tmp_path / "install.log"
    log_path.write_text("Installation completed without any errors.\n")
    monkeypatch.setattr(app_module, "INSTALL_LOG", log_path)
    app_module.settings["hostname"] = "bench"
    html = app_module.app.test_client().get("/install/log").get_data(as_text=True)
    assert '<ol class="next-steps">' in html
    assert "http://bench.local" in html
    assert "USB stick is out" in html
    assert html.index("next-steps") < html.index("USB stick is out")
 def test_log_page_running_state_has_no_restart_button(monkeypatch, tmp_path):
    import app as app_module
    log_path = tmp_path / "install.log"
    log_path.write_text("Creating partitions: /dev/sda\n")
    monkeypatch.setattr(app_module, "INSTALL_LOG", log_path)
    html = app_module.app.test_client().get("/install/log").get_data(as_text=True)
    assert "next-steps" not in html
    assert "install_reboot" not in html and "restart now" not in html
--- a/tests/test_catalog.py
+++ b/tests/test_catalog.py
@ -331,21 +331,3 @@ def test_write_and_read_state_round_trip(catalog):
    assert s["stage"] == "downloading"
    assert s["latest"] == "26.6"
    assert "updated_at" in s
 def test_sync_catalog_failure_writes_error_state(catalog, monkeypatch):
    """A boot-time network failure must not leave the state file on
    'checking' forever — the UI would show 'checking…' with nothing running."""
    from furtka import _release_common as _rc
    def offline(host, repo, path, *, error_cls=RuntimeError):
        raise error_cls("forgejo api https://x/releases: Network is unreachable")
    monkeypatch.setattr(_rc, "forgejo_api", offline)
    with pytest.raises(catalog.CatalogError, match="Network is unreachable"):
        catalog.sync_catalog()
    state = catalog.read_state()
    assert state["stage"] == "error"
    assert "Network is unreachable" in state["error"]
--- a/tests/test_cli.py
+++ b/tests/test_cli.py
@ -158,7 +158,7 @@ def test_app_install_uses_plan_for_named_install(tmp_path, monkeypatch, capsys):
    _write_manifest(bundled, "mosquitto")
    _write_manifest(bundled, "zigbee2mqtt", requires=[{"app": "mosquitto"}])
-    from furtka import install_runner, installer
+    from furtka import installer, reconciler
    # Stub install_from so we don't actually copy files / mess with placeholders.
    install_calls: list[str] = []
@ -168,22 +168,12 @@ def test_app_install_uses_plan_for_named_install(tmp_path, monkeypatch, capsys):
        return tmp_path / src.name
    monkeypatch.setattr(installer, "install_from", fake_install_from)
-    monkeypatch.setattr(install_runner, "_INSTALL_PLAN", tmp_path / "install-plan.json")
+    monkeypatch.setattr(reconciler, "reconcile", lambda *a, **k: [])
    # Named installs drive the docker phase through run_install (so on_install
    # hooks fire) — stub it and assert it's invoked with the chosen target.
    run_calls: list[str] = []
    monkeypatch.setattr(install_runner, "run_install", lambda name: run_calls.append(name))
    rc = main(["app", "install", "zigbee2mqtt"])
    assert rc == 0
    # Provider installed before consumer.
    assert install_calls == ["mosquitto", "zigbee2mqtt"]
    # The docker phase (which fires on_install hooks) ran for the target.
    assert run_calls == ["zigbee2mqtt"]
    # And the plan file was staged for run_install to consume.
    plan = json.loads(install_runner.plan_path().read_text())
    assert plan["target"] == "zigbee2mqtt"
    assert plan["to_install"] == ["mosquitto", "zigbee2mqtt"]
 def test_app_install_named_with_cycle_exits_2(tmp_path, monkeypatch, capsys):
--- a/tests/test_diskprep.py
+++ b/tests/test_diskprep.py
@ -1,146 +0,0 @@
 """release_disk() against a recorded `lsblk -P` picture of the first
 hardware bench: an SSD with an old Proxmox VE `pve` volume group stacked on
 sda3 (swap, root, thin pool). Commands are captured through the injected
 runner — nothing touches real devices."""
 import subprocess
 from pathlib import Path
 import pytest
 from diskprep import release_disk
 # What the bench looked like before cleanup (lsblk -lnP -o NAME,TYPE,MOUNTPOINTS /dev/sda).
 BENCH_BEFORE = """NAME="sda" TYPE="disk" MOUNTPOINTS=""
 NAME="sda1" TYPE="part" MOUNTPOINTS=""
 NAME="sda3" TYPE="part" MOUNTPOINTS=""
 NAME="pve-swap" TYPE="lvm" MOUNTPOINTS="[SWAP]"
 NAME="pve-root" TYPE="lvm" MOUNTPOINTS="/mnt/old"
 NAME="pve-data_tmeta" TYPE="lvm" MOUNTPOINTS=""
 NAME="pve-data-tpool" TYPE="lvm" MOUNTPOINTS=""
 NAME="pve-data" TYPE="lvm" MOUNTPOINTS=""
 NAME="pve-data_tdata" TYPE="lvm" MOUNTPOINTS=""
 NAME="pve-data-tpool" TYPE="lvm" MOUNTPOINTS=""
 NAME="pve-data" TYPE="lvm" MOUNTPOINTS=""
 """
 BENCH_CLEAN = """NAME="sda" TYPE="disk" MOUNTPOINTS=""
 NAME="sda1" TYPE="part" MOUNTPOINTS=""
 NAME="sda3" TYPE="part" MOUNTPOINTS=""
 """
 EMPTY = """NAME="sda" TYPE="disk" MOUNTPOINTS=""
 """
 class FakeRunner:
    """Answers lsblk from a script of snapshots (one per call, last one
    sticks) and records everything else."""
    def __init__(self, lsblk_outputs):
        self.lsblk_outputs = list(lsblk_outputs)
        self.calls = []
    def __call__(self, cmd, capture_output=True, text=True):
        if cmd[0] == "lsblk":
            if len(self.lsblk_outputs) > 1:
                out = self.lsblk_outputs.pop(0)
            else:
                out = self.lsblk_outputs[0]
            return subprocess.CompletedProcess(cmd, 0, out, "")
        self.calls.append(cmd)
        return subprocess.CompletedProcess(cmd, 0, "", "")
 def test_release_tears_down_lvm_stack_leaves_first():
    # lsblk #1 (inventory) and #2 (first removal pass) see the full stack;
    # everything after that is clean — the dm removals "worked".
    runner = FakeRunner([BENCH_BEFORE, BENCH_BEFORE, BENCH_CLEAN])
    lines = release_disk("/dev/sda", run=runner)
    calls = runner.calls
    assert ["swapoff", "/dev/pve-swap"] in calls
    assert ["umount", "--all-targets", "/dev/pve-root"] in calls
    removed = [c[2] for c in calls if c[:2] == ["dmsetup", "remove"]]
    # Thin LV before its pool, pool before tmeta/tdata.
    assert removed.index("pve-data") < removed.index("pve-data-tpool")
    assert removed.index("pve-data-tpool") < removed.index("pve-data_tmeta")
    assert set(removed) == {
        "pve-swap",
        "pve-root",
        "pve-data_tmeta",
        "pve-data-tpool",
        "pve-data",
        "pve-data_tdata",
    }
    assert ["wipefs", "-a", "/dev/sda3"] in calls
    assert ["wipefs", "-a", "/dev/sda1"] in calls
    assert ["wipefs", "-a", "/dev/sda"] in calls
    assert calls[-1] == ["blockdev", "--rereadpt", "/dev/sda"]
    assert not any("WARNING" in line for line in lines)
    assert lines[0].startswith("Releasing /dev/sda")
 def test_release_warns_when_stack_survives():
    runner = FakeRunner([BENCH_BEFORE])  # never becomes clean
    lines = release_disk("/dev/sda", run=runner)
    assert any("WARNING: still in use" in line for line in lines)
    # Still tries to give archinstall a chance.
    assert ["blockdev", "--rereadpt", "/dev/sda"] in runner.calls
 def test_release_empty_disk_only_wipes_and_rereads():
    runner = FakeRunner([EMPTY])
    lines = release_disk("sda", run=runner)  # bare name is accepted too
    assert runner.calls == [["wipefs", "-a", "/dev/sda"], ["blockdev", "--rereadpt", "/dev/sda"]]
    assert any("nothing stacked" in line for line in lines)
 def test_release_survives_missing_tools():
    def runner(cmd, capture_output=True, text=True):
        if cmd[0] == "lsblk":
            return subprocess.CompletedProcess(cmd, 0, BENCH_BEFORE, "")
        raise FileNotFoundError(cmd[0])
    lines = release_disk("/dev/sda", run=runner)
    assert any("command not found" in line for line in lines)
@pytest.fixture
 def app_module(monkeypatch, tmp_path):
    import app as app_module
    monkeypatch.setattr(app_module, "INSTALL_LOG", tmp_path / "install.log")
    monkeypatch.setattr(app_module, "STATE_DIR", tmp_path / "state")
    return app_module
 def test_install_run_releases_disk_before_spawning(app_module, monkeypatch):
    order = []
    def fake_release(disk):
        order.append(("release", disk))
        return ["Releasing X"]
    monkeypatch.setattr(app_module, "release_disk", fake_release)
    monkeypatch.setattr(app_module, "spawn_archinstall", lambda *a: order.append(("spawn",)))
    monkeypatch.setattr(app_module, "build_archinstall_config", lambda s: {})
    monkeypatch.setattr(app_module, "build_archinstall_creds", lambda s: {})
    monkeypatch.delenv("FURTKA_DRY_RUN", raising=False)
    app_module.settings.update(boot_drive="/dev/sda", username="u", password="pw12345678")
    client = app_module.app.test_client()
    resp = client.post("/install/run")
    assert resp.status_code == 302
    assert order == [("release", "/dev/sda"), ("spawn",)]
    assert Path(app_module.INSTALL_LOG).read_text().startswith("Releasing X")
 def test_progress_names_disk_in_use_failure(app_module):
    log = (
        "Traceback (most recent call last):\n"
        "_ped.IOException: ... unable to inform the kernel of the change ..."
    )
    progress = app_module.parse_install_progress(log)
    assert progress["status"] == "error"
    assert "still in use" in progress["phase"]
--- a/tests/test_installer.py
+++ b/tests/test_installer.py
@ -73,31 +73,6 @@ def test_install_from_copies_files(tmp_path, fake_dirs):
    assert (target / ".env").read_text() == "A=1"
 def test_install_from_copies_subdirectories(tmp_path, fake_dirs):
    # Dependency hooks live under scripts/ — the whole subtree must be copied,
    # not just top-level files, or providers ship without their hooks.
    src = _write_app_source(tmp_path, "mosquitto", VALID_MANIFEST, env_example="A=1")
    scripts = src / "scripts"
    scripts.mkdir()
    (scripts / "provision-client.sh").write_text("#!/bin/sh\necho hi\n")
    target = installer.install_from(src)
    assert (target / "scripts" / "provision-client.sh").read_text() == "#!/bin/sh\necho hi\n"
 def test_install_from_reinstall_drops_stale_subdir_files(tmp_path, fake_dirs):
    # A reinstall whose source renamed/removed a hook must not leave the old one.
    src = _write_app_source(tmp_path, "mosquitto", VALID_MANIFEST, env_example="A=1")
    scripts = src / "scripts"
    scripts.mkdir()
    (scripts / "old-hook.sh").write_text("old\n")
    installer.install_from(src)
    (scripts / "old-hook.sh").unlink()
    (scripts / "new-hook.sh").write_text("new\n")
    target = installer.install_from(src)
    assert not (target / "scripts" / "old-hook.sh").exists()
    assert (target / "scripts" / "new-hook.sh").read_text() == "new\n"
 def test_install_from_preserves_existing_env(tmp_path, fake_dirs):
    src = _write_app_source(tmp_path, "fileshare", VALID_MANIFEST, env_example="A=new")
    target = apps_dir() / "fileshare"
--- a/tests/test_reconciler.py
+++ b/tests/test_reconciler.py
@ -196,34 +196,6 @@ def test_reconcile_fires_on_start_before_compose_up(tmp_path, fake_docker, monke
    assert fake_docker["compose_up"][0][1] == "mosquitto"
 def test_reconcile_on_start_hook_receives_consumer_env(tmp_path, fake_docker, monkeypatch):
    # The on_start hook must be able to re-establish provider state with the
    # SAME credentials the consumer already holds, so the consumer's stored
    # .env is injected (namespaced) alongside FURTKA_CONSUMER_APP/_VERSION.
    provider = _make_app(tmp_path, "mosquitto", PROVIDER_MANIFEST)
    (provider / "hooks").mkdir()
    (provider / "hooks" / "ensure-user.sh").write_bytes(b"#!/bin/sh\n")
    consumer = _make_app(tmp_path, "zigbee2mqtt", CONSUMER_MANIFEST)
    # A real, stored credential plus a junk lowercase key that must be dropped.
    (consumer / ".env").write_text("MQTT_PASS=s3cret-from-install\nnot_a_setting=x\n")
    seen_env: dict[str, str] = {}
    def fake_exec_script(app_dir, project, service, script_path, *, env, timeout):
        seen_env.update(env)
        return ""
    monkeypatch.setattr(dockerops, "compose_image_tags", lambda a, p: {"mosquitto": "img"})
    monkeypatch.setattr(dockerops, "compose_exec_script", fake_exec_script)
    reconciler.reconcile(tmp_path)
    assert seen_env["FURTKA_CONSUMER_APP"] == "zigbee2mqtt"
    assert seen_env["FURTKA_CONSUMER_ENV_MQTT_PASS"] == "s3cret-from-install"
    # Lowercase / non-UPPER_SNAKE keys are not exported.
    assert not any(k.endswith("not_a_setting") for k in seen_env)
 def test_reconcile_on_start_failure_skips_consumer_compose_up(tmp_path, fake_docker, monkeypatch):
    provider = _make_app(tmp_path, "mosquitto", PROVIDER_MANIFEST)
    (provider / "hooks").mkdir()
--- a/tests/test_updater.py
+++ b/tests/test_updater.py
@ -316,17 +316,14 @@ def test_link_new_units_only_links_missing(updater, tmp_path, monkeypatch):
    linked = updater._link_new_units(unit_dir)
    assert linked == ["furtka-bar.timer"]
-    # Three calls for the newly-linked timer: link + enable + start. The
+    # Two calls for the newly-linked timer: systemctl link + systemctl enable.
-    # already-linked service is untouched. `enable` alone only arms the
+    # The already-linked service is untouched. Timers need the follow-up
-    # timer for the next boot; `start` makes it fire on the running box
+    # `enable` so self-updates that introduce new timers don't leave them
-    # (26.20 left furtka-welcome.timer dead until reboot without it).
+    # dormant — fresh installs get their enable via the webinstaller.
-    assert len(seen) == 3
+    assert len(seen) == 2
    assert seen[0][:2] == ["systemctl", "link"]
-    # Linked via the `current` symlink, not the versioned dir being scanned,
+    assert seen[0][2].endswith("furtka-bar.timer")
    # so the link survives the next symlink flip / rollback.
    assert seen[0][2] == str(updater.current_symlink() / "assets" / "systemd" / "furtka-bar.timer")
    assert seen[1] == ["systemctl", "enable", "furtka-bar.timer"]
    assert seen[2] == ["systemctl", "start", "furtka-bar.timer"]
 def test_extract_tarball_uses_data_filter_when_available(tmp_path, updater, monkeypatch):
--- a/tests/test_webinstaller_assets.py
+++ b/tests/test_webinstaller_assets.py
@ -227,25 +227,6 @@ def test_systemd_units_reference_current_paths():
        )
 def test_welcome_banner_is_timer_driven():
    """The console banner must keep refreshing so the IP fallback is always
    on screen. A oneshot with RemainAfterExit=yes never re-runs from a timer
    (the unit stays 'active'), and a network-online dependency would delay the
    first paint — both regressions the hardware bench hit in 26.19."""
    timer = (ASSETS / "systemd" / "furtka-welcome.timer").read_text()
    assert "OnUnitActiveSec=" in timer
    assert "furtka-welcome.timer" in app._FURTKA_UNITS
    service = (ASSETS / "systemd" / "furtka-welcome.service").read_text()
    assert "RemainAfterExit" not in service
    assert "network-online.target" not in service
 def test_welcome_banner_always_prints_fallback_line():
    script = (ASSETS / "bin" / "furtka-welcome").read_text()
    assert "no IP address yet" in script
    assert "fallback" in script
 def test_read_asset_raises_for_missing_file():
    with pytest.raises(FileNotFoundError):
        app._read_asset("does/not/exist.html")
@ -278,12 +259,3 @@ def test_post_install_writes_users_json_with_hashed_password(install_cmds):
    # Hash is a real werkzeug hash, not the plaintext password.
    assert parsed["admin"]["hash"] != "test-admin-pw"
    assert check_password_hash(parsed["admin"]["hash"], "test-admin-pw")
 def test_catalog_sync_service_retries_on_failure():
    """First sync at boot can race DHCPv4 (IPv6 makes network-online fire
    early); the unit must retry rather than wait for the daily timer."""
    body = (ASSETS / "systemd" / "furtka-catalog-sync.service").read_text()
    assert "Restart=on-failure" in body
    assert "RestartSec=" in body
    assert "StartLimitBurst=" in body
--- a/webinstaller/app.py
+++ b/webinstaller/app.py
@ -11,7 +11,6 @@ import sys
 from datetime import UTC
 from pathlib import Path
 from diskprep import release_disk
 from drives import list_scored_devices
 from flask import Flask, jsonify, redirect, render_template, request, url_for
@ -97,16 +96,6 @@ PROGRESS_PHASES = [
 PROGRESS_ERROR_MARKERS = ("Traceback (most recent call last)", "archinstall: error:")
 # Known failure signatures → a phase label that tells the user what to do
 # instead of a bare "open Show details". Checked in order; first hit wins.
 PROGRESS_ERROR_HINTS = [
    (
        "unable to inform the kernel of the change",
        "Installation failed — the disk was still in use (old LVM/RAID/swap "
        "from a previous system). Reboot the installer and try again",
    ),
 ]
 def parse_install_progress(log):
    percent = 2
@ -121,10 +110,6 @@ def parse_install_progress(log):
    elif any(m in log for m in PROGRESS_ERROR_MARKERS):
        status = "error"
        phase = "Installation failed — open Show details below"
        for marker, hint in PROGRESS_ERROR_HINTS:
            if marker in log:
                phase = hint
                break
    else:
        status = "running"
@ -279,9 +264,6 @@ _FURTKA_UNITS = (
    "furtka-status.service",
    "furtka-status.timer",
    "furtka-welcome.service",
    # Re-runs the welcome banner every few seconds so the console always
    # shows the current IP fallback (or a "no IP yet" hint).
    "furtka-welcome.timer",
    # Daily apps-catalog pull. Timer drives the service; the .service itself
    # is oneshot and also callable ad-hoc via `furtka catalog sync`.
    "furtka-catalog-sync.service",
@ -496,7 +478,7 @@ def build_archinstall_config(s):
            "docker",
            # Base OS post-install services. Only packaged units go here —
            # archinstall runs `systemctl enable` on this list *before*
-            # custom_commands, so our own furtka-welcome.timer + furtka-status.timer
+            # custom_commands, so our own furtka-welcome + furtka-status.timer
            # units (written in custom_commands) are enabled there instead.
            "caddy",
            "avahi-daemon",
@ -552,9 +534,7 @@ def write_install_files(s, state_dir):
 def spawn_archinstall(config_path, creds_path, log_path):
-    # Append: install_run() already truncated the log and may have written
+    log_fh = open(log_path, "wb")
    # the disk-release lines we want to keep visible above archinstall's own.
    log_fh = open(log_path, "ab")
    return subprocess.Popen(
        [
            "archinstall",
@ -626,11 +606,6 @@ def install_run():
            f"--creds {creds_path} --silent\n"
        )
    else:
        # Free the target disk first: udev auto-activates old LVM/RAID/swap
        # on the live ISO, and archinstall can't re-read a partition table
        # while those hold the partitions open (first hardware bench, 26.19).
        with INSTALL_LOG.open("a") as fh:
            fh.write("\n".join(release_disk(settings["boot_drive"])) + "\n\n")
        spawn_archinstall(config_path, creds_path, INSTALL_LOG)
    return redirect(url_for("install_log_view"))
@ -642,7 +617,6 @@ def install_log_view():
        "install/log.html",
        log=log,
        progress=parse_install_progress(log),
        hostname=settings["hostname"],
    )
--- a/webinstaller/diskprep.py
+++ b/webinstaller/diskprep.py
@ -1,125 +0,0 @@
 """Release a target disk before handing it to archinstall.
 The live ISO ships lvm2, mdadm, dmraid and cryptsetup (releng defaults), and
 udev happily auto-activates whatever it finds on attached disks at boot. A
 drive that used to live in another machine — the first hardware bench had an
 old Proxmox VE install on its SSD — therefore comes up with device-mapper
 volumes (or swap, or md arrays) stacked on top of its partitions. archinstall
 then writes the new partition table fine but `BLKRRPART` fails with
    Partition(s) 2, 3 on /dev/sda have been written, but we have been unable
    to inform the kernel of the change, probably because it/they are in use.
 and the install dies at 12 %. Nothing on a fresh VM ever triggers this,
 which is why it survived every smoke run.
 `release_disk()` tears that stack down leaves-first (swapoff, umount, dmsetup
 remove / mdadm --stop), wipes signatures and asks the kernel to re-read the
 partition table. Every step is logged so the install log shows what was
 done. All commands are best-effort: the point is to leave archinstall a
 disk the kernel can re-partition, not to be a full disk-management tool.
 """
 import re
 import subprocess
 _PAIR_RE = re.compile(r'(\w+)="([^"]*)"')
 def _run(cmd, run):
    try:
        result = run(cmd, capture_output=True, text=True)
    except FileNotFoundError:
        return 127, f"{cmd[0]}: command not found"
    out = ((result.stdout or "") + (result.stderr or "")).strip()
    return result.returncode, out
 def _parse_pairs(output):
    """Parse `lsblk -P` key="value" lines into dicts."""
    rows = []
    for line in output.splitlines():
        row = {}
        for match in _PAIR_RE.finditer(line):
            row[match.group(1)] = match.group(2)
        if row.get("NAME"):
            rows.append(row)
    return rows
 def _children(disk, run):
    """Everything stacked on `disk`, in lsblk tree order, disk itself excluded."""
    rc, out = _run(["lsblk", "-lnP", "-o", "NAME,TYPE,MOUNTPOINTS", disk], run)
    if rc != 0:
        return []
    rows = _parse_pairs(out)
    seen = set()
    children = []
    for row in rows:
        if row.get("TYPE") == "disk" or row["NAME"] in seen:
            continue
        seen.add(row["NAME"])
        children.append(row)
    return children
 def release_disk(disk, run=subprocess.run):
    """Free `disk` (e.g. "/dev/sda") of anything that would block a
    partition-table reload. Returns the log lines describing what happened."""
    if not disk.startswith("/dev/"):
        disk = f"/dev/{disk}"
    lines = [f"Releasing {disk} before install…"]
    children = _children(disk, run)
    if not children:
        lines.append("  nothing stacked on the disk — good.")
    else:
        lines.append("  found: " + ", ".join(f"{c['NAME']} ({c['TYPE']})" for c in children))
    # Leaves first: mountpoints and swap sit on the outermost devices.
    for child in reversed(children):
        dev = f"/dev/{child['NAME']}"
        mounts = child.get("MOUNTPOINTS", "")
        if "[SWAP]" in mounts:
            rc, out = _run(["swapoff", dev], run)
            lines.append(f"  swapoff {dev}: {'ok' if rc == 0 else out}")
        elif mounts:
            rc, out = _run(["umount", "--all-targets", dev], run)
            lines.append(f"  umount {dev}: {'ok' if rc == 0 else out}")
    # Device-mapper (LVM, thin pools, LUKS) and md stacks. Thin pools need
    # their thin LVs gone before the pool goes, and lsblk lists shared nodes
    # more than once, so go leaves-first and retry a couple of passes until
    # nothing dm/md-shaped is left.
    for _ in range(3):
        stacked = [c for c in reversed(_children(disk, run)) if c["TYPE"] != "part"]
        if not stacked:
            break
        for child in stacked:
            name, typ = child["NAME"], child["TYPE"]
            if typ.startswith("raid") or name.startswith("md"):
                cmd = ["mdadm", "--stop", f"/dev/{name}"]
            else:
                cmd = ["dmsetup", "remove", name]
            rc, out = _run(cmd, run)
            lines.append(f"  {' '.join(cmd)}: {'ok' if rc == 0 else out}")
    leftovers = [c["NAME"] for c in _children(disk, run) if c["TYPE"] != "part"]
    if leftovers:
        lines.append(
            "  WARNING: still in use after cleanup: "
            + ", ".join(leftovers)
            + " — the install may fail to re-read the partition table."
        )
    # Old signatures (LVM PV headers, RAID superblocks) would otherwise be
    # re-activated by udev the moment the kernel re-reads the table.
    for child in reversed(_children(disk, run)):
        if child["TYPE"] == "part":
            rc, out = _run(["wipefs", "-a", f"/dev/{child['NAME']}"], run)
            lines.append(f"  wipefs /dev/{child['NAME']}: {'ok' if rc == 0 else out}")
    rc, out = _run(["wipefs", "-a", disk], run)
    lines.append(f"  wipefs {disk}: {'ok' if rc == 0 else out}")
    rc, out = _run(["blockdev", "--rereadpt", disk], run)
    lines.append(f"  re-read partition table: {'ok' if rc == 0 else out}")
    return lines
--- a/webinstaller/static/style.css
+++ b/webinstaller/static/style.css
@ -421,11 +421,3 @@ select:focus {
  outline-offset: 3px;
  border-radius: 2px;
 }
 /* "Furtka is ready" — the two steps before the restart button (log.html). */
 .next-steps {
  margin: 1.5rem 0 1rem;
  padding-left: 1.4rem;
  line-height: 1.5;
 }
 .next-steps li { margin-bottom: 0.6rem; }
--- a/webinstaller/templates/install/log.html
+++ b/webinstaller/templates/install/log.html
@ -17,25 +17,16 @@
 {% else %}Installing Furtka{% endif %}
 </h1>
 <p class="lede" id="install-lede">
-{% if progress.status == "done" %}Installation finished. Two more steps and Furtka is running from its own disk.
+{% if progress.status == "done" %}Installation finished. <strong>Remove the installer USB / eject the ISO</strong>, then click Reboot.
 {% elif progress.status == "error" %}Something went wrong. Open the details below and share them so we can help.
 {% else %}This takes a few minutes. Don't close this page or power off the machine.{% endif %}
 </p>
 {% if progress.status == "done" %}
 {# The USB-stick step has to be read *before* the click: the machine reboots
   3 s after it, and most BIOSes boot the stick before the disk — so the
   installer would just come back. Seen on the first hardware bench. #}
 <ol class="next-steps">
    <li><strong>Pull out the USB stick</strong> (or eject the installer ISO in your VM).
        If it stays in, the computer will start this installer again instead of Furtka.</li>
    <li>Click the button below. The computer restarts and comes back as
        <strong>http://{{ hostname }}.local</strong> in about a minute.</li>
 </ol>
 <form method="post" action="{{ url_for('install_reboot') }}"
-      onsubmit="return confirm('USB stick removed? Click OK to restart the computer.');">
+      onsubmit="return confirm('Have you removed the installer USB / ejected the ISO? Click OK to reboot.');">
    <div class="actions">
-        <button type="submit" class="btn btn-primary">USB stick is out — restart now</button>
+        <button type="submit" class="btn btn-primary">Reboot now</button>
    </div>
 </form>
 {% endif %}
--- a/website/README.md
+++ b/website/README.md
@ -42,15 +42,6 @@ This rsyncs `website/` to `/srv/furtka-site/` on the VM over SSH and runs
 `hugo --minify` into `/var/www/furtka.org`. Same end state as the CI path,
 just with an SSH hop.
 ### Poll counter
 `/api/poll/` is a tiny stdlib Python service (`ops/poll/pollsvc.py`,
 SQLite, systemd `DynamicUser`) behind nginx on `127.0.0.1:8090`. Install or
 update it on the VM with `sudo ops/poll/setup-poll.sh`; the nginx location
 and rate limit come from `ops/nginx/` via `setup-vm.sh`. Devices are told
 apart by a salted hash of IP + user agent — no cookie — and a repeat vote
 from the same device changes the choice instead of adding one.
 ### First-time VM setup
 Only needed once, when provisioning a fresh forge-runner VM:
@ -67,18 +58,11 @@ hugo.toml            Hugo config (multilingual: en default, de)
 content/             Markdown pages
  _index.md          Home (EN)
  _index.de.md       Home (DE)
  logo.md / .de.md   Logo poll (/logo/, /de/logo/) — layout `poll`, votes via /api/poll/
 layouts/             Custom inline theme — no external theme or framework
  _default/          baseof, single, list
-  partials/          head, header, footer, gate SVG, lang switcher, mark-m / mark-r (poll)
+  partials/          head, header, footer, gate SVG, lang switcher
  poll/single.html   Logo poll page; strings come from the content front matter
  index.html         Home-only layout with editorial hero
 assets/css/main.css  Stylesheet (fingerprinted + minified on build)
 assets/js/poll.js    Vote script for /logo/ — plain fetch, no cookies, no storage
 data/logo/{m,r}.json Generated: mark SVGs, lockups, 16 px icons, console banner per proposal
 static/img/logo/     Generated: tiles, splash and social card per proposal
 tools/logo-assets.py Generator for the two lines above (cairosvg + Pillow + fontTools);
                     run on the dev box, commit the output. Font: tools/FONT-PROVENANCE.md
 static/favicon.svg   Gate mark in crimson
 deploy.sh            Manual rsync + remote Hugo build (over SSH, for off-CI pushes)
 deploy-ci.sh         Local rsync + Hugo build — runs on forge-runner-01 from CI
--- a/website/assets/css/main.css
+++ b/website/assets/css/main.css
@ -439,132 +439,3 @@ main.container {
    will-change: auto;
  }
 }
 /* ── Logo poll ───────────────────────────────────────────────── */
 .poll-grid {
  display: grid;
  grid-template-columns: repeat(auto-fit, minmax(17rem, 1fr));
  gap: 1.5rem;
  margin-top: 2.5rem;
 }
 .poll-card {
  display: flex;
  flex-direction: column;
  gap: 0.9rem;
  padding: 1.4rem;
  border: 1px solid var(--card-border);
  border-radius: 1rem;
  background: var(--card-bg);
  transition: border-color 160ms, box-shadow 160ms;
 }
 .is-yours { border-color: var(--accent); box-shadow: 0 0 0 3px var(--accent-glow); }
 .poll-card h2 { margin: 0; font-size: 1.25rem; letter-spacing: -0.01em; }
 .poll-desc { margin: 0; color: var(--fg-muted); font-size: 0.95rem; }
 .poll-art { display: grid; place-items: center; padding: 2.2rem 1rem; border-radius: 0.75rem; }
 .poll-art--m { background: var(--bg-subtle); }
 .poll-art--r { background: #151515; }
 .poll-art .pm { height: 9rem; width: auto; }
 .pm { display: block; }
 .poll-btn {
  margin-top: auto;
  padding: 0.85rem 1.2rem;
  border: 1px solid var(--accent);
  border-radius: 0.6rem;
  background: var(--accent);
  color: #fff;
  font: inherit;
  font-weight: 600;
  cursor: pointer;
  transition: background 140ms, transform 140ms;
 }
 .poll-btn:hover:not(:disabled) { background: var(--accent-hover); transform: translateY(-1px); }
 .poll-btn:focus-visible { outline: 2px solid var(--fg); outline-offset: 2px; }
 .poll-btn:disabled { cursor: default; opacity: 0.85; }
 .is-yours .poll-btn { background: transparent; color: var(--accent); }
 .poll-bar { height: 0.45rem; border-radius: 999px; background: var(--bg-subtle); overflow: hidden; display: none; }
 .poll-bar i { display: block; height: 100%; width: 0; background: var(--accent); transition: width 500ms ease; }
 .poll--voted .poll-bar { display: block; }
 .poll-count { margin: 0; min-height: 1.4em; font-size: 0.85rem; color: var(--fg-muted); font-variant-numeric: tabular-nums; }
 .poll-status { margin: 1.25rem 0 0; min-height: 1.5em; color: var(--fg-muted); }
 .poll-note { margin-top: 1rem; max-width: var(--measure); font-size: 0.85rem; color: var(--fg-muted); }
 .poll-note a { color: var(--accent); }
 /* showcase */
 .show { display: flex; flex-direction: column; gap: 3rem; margin-top: 4rem; }
 .show-intro { margin: 0; }
 .show-row { display: flex; flex-direction: column; gap: 0.6rem; }
 .show-h { margin: 0; font-size: 1.35rem; letter-spacing: -0.01em; }
 .show-p { margin: 0 0 0.6rem; max-width: var(--measure); color: var(--fg-muted); font-size: 0.95rem; }
 .show-pair { display: grid; grid-template-columns: repeat(auto-fit, minmax(17rem, 1fr)); gap: 1.25rem; }
 .show-cell {
  display: flex; flex-direction: column; gap: 0.9rem;
  padding: 1.1rem; border: 1px solid var(--card-border); border-radius: 0.9rem; background: var(--card-bg);
 }
 .show-cell--m { color: var(--accent); }
 .show-cell--r { color: #af6428; }
 .show-tag { font-size: 0.7rem; letter-spacing: 0.12em; text-transform: uppercase; color: var(--fg-muted); }
 .sizes { display: flex; align-items: flex-end; gap: 1.1rem; flex-wrap: wrap; }
 .sizes figure { margin: 0; display: flex; flex-direction: column; align-items: center; gap: 0.35rem; }
 .sizes figcaption { font-family: var(--font-mono); font-size: 0.65rem; color: var(--fg-muted); }
 .sz { display: block; }
 .sz .pm { width: auto; }
 .sz-96 .pm { height: 96px; } .sz-48 .pm { height: 48px; } .sz-32 .pm { height: 32px; } .sz-24 .pm { height: 24px; }
 .px { image-rendering: pixelated; }
 .lock { display: grid; place-items: center; padding: 1rem; border-radius: 0.6rem; background: var(--bg-subtle); }
 .lock-h .pm { height: 3rem; width: auto; max-width: 100%; }
 .lock-s .pm { height: 7rem; width: auto; max-width: 100%; }
 .mock { border: 1px solid var(--border); border-radius: 0.7rem; overflow: hidden; background: var(--bg); color: var(--fg); font-size: 0.8rem; }
 .tabbar { background: var(--bg-subtle); padding: 0.55rem 0.65rem; }
 .tab { display: inline-flex; align-items: center; gap: 0.45rem; padding: 0.3rem 0.65rem; border: 1px solid var(--border); border-radius: 0.4rem; background: var(--bg); color: var(--fg-muted); }
 .urlbar { padding: 0.45rem 0.75rem; border-top: 1px solid var(--border); font-family: var(--font-mono); font-size: 0.72rem; color: var(--fg-muted); }
 .uihead { display: flex; align-items: center; gap: 0.5rem; padding: 0.8rem 0.9rem; border-top: 1px solid var(--border); border-bottom: 1px solid var(--border); }
 .uihead-mark { display: inline-flex; color: inherit; }
 .show-cell--m .uihead-mark { color: var(--accent); }
 .show-cell--r .uihead-mark { color: #af6428; }
 .uihead-mark .pm { height: 1.25rem; width: auto; }
 .uihead-name { font-weight: 600; letter-spacing: 0.13em; text-transform: uppercase; font-size: 0.72rem; color: var(--fg); }
 .uihead-nav { margin-left: auto; display: flex; gap: 0.7rem; color: var(--fg-muted); }
 .uibody { padding: 0.9rem; display: flex; flex-direction: column; gap: 0.45rem; }
 .uibody i { display: block; height: 0.45rem; border-radius: 3px; background: var(--bg-subtle); }
 .uibody i.s { width: 45%; }
 .tiles { display: flex; gap: 1rem; justify-content: center; padding: 1.2rem; border-radius: 0.6rem; background: var(--bg-subtle); }
 .tiles img { width: 6rem; height: 6rem; }
 .term {
  margin: 0; padding: 0.9rem 1rem; border-radius: 0.6rem; overflow-x: auto;
  background: #100f0c; color: #d8d2c2; font-family: var(--font-mono); font-size: 0.55rem; line-height: 1;
  -webkit-text-size-adjust: none; text-size-adjust: none;
 }
 .term i, .term b { font-style: normal; font-weight: 400; color: inherit; }
 .show-cell--m .term i { color: #ff6b56; } .show-cell--m .term b { color: #ff6b56; }
 .show-cell--r .term i { color: #c9803f; } .show-cell--r .term b { color: #c9803f; }
 .shot { display: block; width: 100%; height: auto; border-radius: 0.6rem; }
 .grounds { display: grid; grid-template-columns: repeat(2, 1fr); gap: 0.6rem; }
 .ground { display: grid; place-items: center; padding: 1.2rem; border-radius: 0.6rem; border: 1px solid var(--border); }
 .ground--fg { background: var(--bg-subtle); color: var(--fg); }
 .ground .pm { height: 3.2rem; width: auto; }
 .poll-final { margin-top: 3.5rem; display: flex; flex-direction: column; gap: 1rem; }
 .poll-final-row { display: grid; grid-template-columns: repeat(auto-fit, minmax(15rem, 1fr)); gap: 1.25rem; }
 .poll-final-card {
  display: flex; flex-direction: column; gap: 0.8rem; align-items: stretch;
  padding: 1.1rem; border: 1px solid var(--card-border); border-radius: 0.9rem; background: var(--card-bg);
 }
 .poll-final-mark { display: grid; place-items: center; padding: 0.8rem; }
 .poll-final-mark .pm { height: 3.5rem; width: auto; }
 .home-poll {
  display: inline-flex; align-items: center; gap: 0.6rem; margin-top: 1.4rem;
  padding: 0.55rem 0.95rem; border: 1px solid var(--border); border-radius: 999px;
  background: var(--card-bg); color: var(--fg); text-decoration: none; font-size: 0.92rem;
 }
 .home-poll:hover { border-color: var(--accent); }
 .home-poll .pm { height: 1.1rem; width: auto; color: var(--accent); }
 .home-poll .pm + .pm { color: #af6428; }
 /* Random left/right per visit — data-logo-order is set in head.html before first paint.
   Every pair container is a grid/flex, so `order` swaps the columns without touching the DOM. */
 [data-logo-order="rm"] .poll-card[data-choice="m"],
 [data-logo-order="rm"] .show-cell.show-cell--m,
 [data-logo-order="rm"] .poll-final-card[data-choice="m"],
 [data-logo-order="mr"] .poll-card[data-choice="r"],
 [data-logo-order="mr"] .show-cell.show-cell--r,
 [data-logo-order="mr"] .poll-final-card[data-choice="r"] { order: 1; }
@media (prefers-reduced-motion: reduce) { .poll-bar i, .poll-btn { transition: none; } }
--- a/website/assets/js/poll.js
+++ b/website/assets/js/poll.js
@ -1,59 +0,0 @@
 // furtka.org logo poll — no cookies, no storage. The server tells us
 // what this device already chose (salted hash of IP + user agent).
 (function () {
  var root = document.querySelector('.poll');
  if (!root || !window.fetch) return;
  var api = root.dataset.api;
  var status = root.querySelector('.poll-status');
  var t = status.dataset;
  var buttons = root.querySelectorAll('[data-vote]');
  var busy = false;
  function pct(n, total) { return total ? Math.round((n / total) * 100) : 0; }
  function each(sel, fn) { Array.prototype.forEach.call(root.querySelectorAll(sel), fn); }
  function render(d) {
    var total = d.total || 0;
    root.classList.toggle('poll--voted', !!d.yours);
    Object.keys(d.counts).forEach(function (k) {
      var n = d.counts[k], p = pct(n, total), mine = d.yours === k;
      each('[data-choice="' + k + '"]', function (card) {
        card.classList.toggle('is-yours', mine);
        var bar = card.querySelector('.poll-bar i'); if (bar) bar.style.width = p + '%';
        var c = card.querySelector('[data-count]'); if (c) c.textContent = d.yours ? p + ' % · ' + n : '';
      });
      each('[data-vote="' + k + '"]', function (b) {
        b.disabled = mine;
        b.textContent = mine ? t.tVoted : (d.yours ? t.tChange : b.dataset.label);
      });
    });
    status.textContent = d.yours ? t.tTotal.replace('{n}', total) : '';
  }
  function load() {
    fetch(api, { headers: { Accept: 'application/json' } })
      .then(function (r) { if (!r.ok) throw r; return r.json(); })
      .then(render)
      .catch(function () { status.textContent = t.tError; });
  }
  Array.prototype.forEach.call(buttons, function (b) {
    b.dataset.label = b.textContent;
    b.addEventListener('click', function () {
      if (busy) return;
      busy = true; b.disabled = true;
      fetch(api, {
        method: 'POST',
        headers: { 'Content-Type': 'application/json', Accept: 'application/json' },
        body: JSON.stringify({ choice: b.dataset.vote })
      })
        .then(function (r) { if (!r.ok) throw r; return r.json(); })
        .then(function (d) { render(d); status.scrollIntoView({ block: 'nearest' }); })
        .catch(function () { status.textContent = t.tError; b.disabled = false; })
        .then(function () { busy = false; });
    });
  });
  status.textContent = '';
  load();
 })();
--- a/website/content/_index.de.md
+++ b/website/content/_index.de.md
@ -1,9 +1,7 @@
 ---
 title: "Furtka"
 description: "Offenes Heimserver-Betriebssystem — einfach genug für alle."
-status: "<span class=\"mono\">26.20-alpha</span> — in Arbeit"
+status: "<span class=\"mono\">26.16-alpha</span> — in Arbeit"
 poll_link: "/de/logo/"
 poll_text: "Wir suchen ein Logo — hilf uns beim Aussuchen"
 # features_today / features_next müssen index-parallel zu content/_index.md bleiben.
 intro: |
  **Furtka** ist ein offenes Heimserver-Betriebssystem.
@ -21,15 +19,11 @@ features_today:
  - "Apps mit einem Klick installieren und entfernen"
  - "Eine installierte App mit einem Klick aktualisieren (holt das neueste Container-Image)"
  - "Furtka selbst mit einem Klick aktualisieren — keine Neuinstallation mehr für neue Features"
  - "Die Bedienseite fragt nach einem Passwort — niemand im WLAN kommt einfach so rein"
  - "Neue Apps kommen aus einem Online-Katalog, ohne auf ein Furtka-Update zu warten"
  - "Apps können auf anderen Apps aufbauen — was eine braucht, wird mit installiert"
  - "Verschlüsselte Verbindung im Heimnetz, in den Einstellungen einschaltbar"
 features_next_label: "Was als Nächstes kommt"
 features_next:
  - "Apps für Fotos, Dateien, Smarthome, Spiele-Streaming und Medien"
  - "Einfachere Sprache im Einrichtungs-Assistenten"
-  - "Den Server auch von unterwegs erreichen"
+  - "Sichere Verbindung im Heimnetz (ohne Warnmeldung im Browser)"
  - "Mehrere Server zusammenschalten"
 ---
--- a/website/content/_index.md
+++ b/website/content/_index.md
@ -1,9 +1,7 @@
 ---
 title: "Furtka"
 description: "Open-source home server OS — simple enough for everyone."
-status: "<span class=\"mono\">26.20-alpha</span> — work in progress"
+status: "<span class=\"mono\">26.16-alpha</span> — work in progress"
 poll_link: "/logo/"
 poll_text: "We're picking a logo — help us choose"
 # Keep features_today / features_next index-aligned with content/_index.de.md.
 intro: |
  **Furtka** is an open-source home server OS.
@ -21,15 +19,11 @@ features_today:
  - "Install and remove apps with one click"
  - "Update an installed app with one click (pulls the newest container image)"
  - "Update Furtka itself with one click — no reinstalling for new features"
  - "The control page asks for a password — nobody on the Wi-Fi can just walk in"
  - "New apps arrive from an online catalog, without waiting for a Furtka update"
  - "Apps can build on other apps — what one needs gets installed alongside it"
  - "Encrypted connection on your home network, switched on in settings"
 features_next_label: "What's coming next"
 features_next:
  - "Apps for photos, files, smart home, game streaming and media"
  - "Plainer language in the setup wizard"
-  - "Reaching your server from outside the house"
+  - "Secure connection on your home network (no browser warning)"
  - "Linking several servers together"
 ---
--- a/website/content/datenschutz.de.md
+++ b/website/content/datenschutz.de.md
@ -11,8 +11,7 @@ Diese Website setzt **keine Cookies**, lädt **keine Schriften oder
 Skripte von Drittanbietern**, bindet **keine Analyse- oder
 Tracking-Dienste** ein und enthält **keine externen Einbettungen**
 (YouTube, Maps, Social-Media-Buttons, …). Technisch anfallend sind
-ausschließlich kurzfristige Server-Zugriffsprotokolle — und, solange die
+ausschließlich kurzfristige Server-Zugriffsprotokolle.
 [Logo-Abstimmung](/de/logo/) läuft, ein gesalzener Hash pro Stimme (siehe unten).
 ### Verantwortlicher
@ -44,22 +43,6 @@ an Betrieb und Sicherheit).
 Infrastruktur; es gibt keinen externen Auftragsverarbeiter.
 **Drittlandübermittlung:** keine.
 ### Logo-Abstimmung
 Auf der Seite [/de/logo/](/de/logo/) können Sie zwischen zwei
 Logo-Vorschlägen abstimmen. Damit jedes Gerät ohne Cookie einmal gezählt
 wird, speichert der Abstimmungsserver einen **gesalzenen SHA-256-Hash aus
 Ihrer IP-Adresse und Browser-Kennung** zusammen mit Ihrer Wahl und dem
 Zeitpunkt der Stimmabgabe. Der Hash lässt sich nicht in die Adresse
 zurückrechnen; das Salt verlässt den Server nicht.
 **Zweck:** Zählung je Gerät einmal.
 **Rechtsgrundlage:** Art. 6 Abs. 1 lit. f DSGVO — berechtigtes Interesse
 an einer ehrlichen Auszählung; die Teilnahme ist freiwillig.
 **Speicherdauer:** bis zum Ende der Abstimmung, danach wird die Datenbank
 gelöscht.
 **Empfänger:** keine.
 ### Cookies und Tracking
 Keine. Es werden keine Cookies gesetzt, kein LocalStorage oder
@ -92,5 +75,5 @@ Website: <https://www.datenschutz.rlp.de>
 ### Stand
-Diese Erklärung ist aktuell gültig und wurde zuletzt am 26.08.2026
+Diese Erklärung ist aktuell gültig und wurde zuletzt am 18.04.2026
 aktualisiert.
--- a/website/content/datenschutz.md
+++ b/website/content/datenschutz.md
@ -11,8 +11,7 @@ sitemap:
 This website sets **no cookies**, loads **no third-party fonts or
 scripts**, embeds **no analytics or tracking services**, and contains
 **no external embeds** (YouTube, Maps, social buttons, …). The only
-technical data collected is short-lived server access logs — plus, while
+technical data collected is short-lived server access logs.
 the [logo poll](/logo/) is running, one salted hash per vote (see below).
 ### Controller
@ -44,20 +43,6 @@ and security.
 external processor is involved.
 **Transfers outside the EU/EEA:** none.
 ### Logo poll
 The page [/logo/](/logo/) lets you vote between two logo proposals. So
 that each device is counted once without a cookie, the poll server stores
 a **salted SHA-256 hash of your IP address and browser identification**
 together with your choice and the time of the vote. The hash cannot be
 turned back into the address; the salt never leaves the server.
 **Purpose:** counting votes once per device.
 **Legal basis:** Art. 6(1)(f) GDPR — legitimate interest in an honest
 tally; voting is voluntary.
 **Retention:** until the poll is closed, then the database is deleted.
 **Recipients:** none.
 ### Cookies and tracking
 None. No cookies are set, no localStorage or sessionStorage is used, and
@ -90,6 +75,6 @@ Website: <https://www.datenschutz.rlp.de>
 ### Last updated
-This statement was last updated on 2026-08-26.
+This statement was last updated on 2026-04-18.
 The German version of this privacy statement is the legally binding one.
--- a/website/content/logo.de.md
+++ b/website/content/logo.de.md
@ -1,53 +0,0 @@
 ---
 title: "Welches Logo?"
 description: "Zwei Vorschläge für das Furtka-Zeichen. Wähl das, das dir besser gefällt — ein Klick genügt."
 translationKey: "logo"
 layout: single
 type: poll
 poll: logo
 image: /img/logo/vote-card.png
 sitemap:
  priority: 0.5
 m:
  short: "M"
  title: "M — das f im Tor"
  text: "Ein kleines f, aus einem Rundbogentor ausgestanzt. Der Stamm ist der Torpfosten, die zwei Balken sind die Querriegel."
 r:
  short: "R"
  title: "R — Fenster, Rad und F"
  text: "Ein Bogenfenster mit einem Speichenrad dahinter; in der oberen rechten Scheibe wird die Speiche zum F."
 show:
  intro: "Noch unentschieden? Hier ist jedes Zeichen überall dort, wo es funktionieren muss."
  sizes: "Groß und klein"
  sizes_text: "Vom Poster bis zum 16-Pixel-Symbol im Browser-Tab. Unter 32 Pixeln wechseln beide auf eine vereinfachte Zeichnung — M verliert nichts, R behält Fenster, Kreuz und Nabe."
  name: "Mit dem Namen"
  name_text: "Nebeneinander und gestapelt. Die Wortmarke ist bei beiden dieselbe, also entscheidet nur das Zeichen."
  browser: "Im Browser"
  browser_text: "Das Tab-Symbol in echter Größe und die Kopfzeile von furtka.org."
  nav1: "Doku"
  nav2: "Blog"
  phone: "Auf dem Handy"
  phone_text: "Startbildschirm-Symbol — eckig wie auf Android, rund wie manche Launcher es beschneiden."
  box: "Auf dem Server"
  box_text: "Der Text-Willkommensbildschirm, den der Server am Monitor zeigt, und der Startbildschirm beim Booten."
  shared: "Geteilt"
  shared_text: "Die Vorschaukarte, die erscheint, wenn jemand einen Link zu furtka.org postet."
  colour: "In Farbe"
  colour_text: "Auf hell, auf dunkel, auf der eigenen Farbe und in normaler Textfarbe — jedes Zeichen ist eine Form und nimmt die Farbe an, die es umgibt."
  final: "Genug gesehen?"
 labels:
  vote: "Dieses hier"
  voted: "Deine Wahl"
  change: "Zu diesem wechseln"
  total: "Bisher {n} Stimmen. Danke!"
  error: "Die Abstimmung ist gerade nicht erreichbar — bitte gleich noch einmal versuchen."
  nojs: "Zum Abstimmen wird JavaScript benötigt."
  note: "Keine Cookies, kein Konto. Damit jedes Gerät einmal zählt, speichert der Server einen gesalzenen Hash aus IP-Adresse und Browser — nicht die Adresse selbst. Details in der <a href=\"/de/datenschutz/\">Datenschutzerklärung</a>."
 ---
 *Furtka* ist polnisch für die kleine Gartenpforte — die Tür im Zaun, durch
 die man hineinkommt, ohne das große Tor aufzumachen. Beide Zeichen spielen
 damit: das eine zeichnet den Buchstaben ins Tor, das andere schaut durchs
 Tor auf ein Rad. Stimm direkt hier ab — oder scroll erst weiter und sieh
 beide Zeichen überall, wo sie funktionieren müssen, vom Poster bis zum
 winzigen Symbol im Browser-Tab.
--- a/website/content/logo.md
+++ b/website/content/logo.md
@ -1,53 +0,0 @@
 ---
 title: "Which logo?"
 description: "Two proposals for the Furtka mark. Pick the one you like better — it takes one click."
 translationKey: "logo"
 url: /logo/
 layout: single
 type: poll
 poll: logo
 image: /img/logo/vote-card.png
 sitemap:
  priority: 0.5
 m:
  short: "M"
  title: "M — the f in the gate"
  text: "A lowercase f cut out of an arched gate. The stem is the gate post, the two rails are the crossbars."
 r:
  short: "R"
  title: "R — window, wheel and F"
  text: "An arched window with a wheel of spokes behind it; in the top-right pane the spoke becomes an F."
 show:
  intro: "Not sure yet? Here is each mark everywhere it would have to work."
  sizes: "Big and small"
  sizes_text: "From a poster to the 16-pixel icon in a browser tab. Below 32 pixels both marks switch to a simplified drawing — M drops nothing, R keeps the window, the cross and the hub."
  name: "With the name"
  name_text: "Side by side and stacked. The wordmark is the same for both, so only the mark decides."
  browser: "In the browser"
  browser_text: "The tab icon at its real size, and the site header of furtka.org."
  nav1: "Docs"
  nav2: "Blog"
  phone: "On the phone"
  phone_text: "Home-screen icon — square as on Android, round as some launchers cut it."
  box: "On the box"
  box_text: "The text-mode welcome screen your server shows on a monitor, and the boot splash."
  shared: "Shared"
  shared_text: "The preview card that appears when someone posts a link to furtka.org."
  colour: "In colour"
  colour_text: "On light, on dark, on its own colour, and in plain text colour — each mark is one shape and takes whatever colour is around it."
  final: "Seen enough?"
 labels:
  vote: "This one"
  voted: "Your pick"
  change: "Switch to this one"
  total: "{n} votes so far. Thank you!"
  error: "Couldn't reach the poll right now — please try again in a moment."
  nojs: "Voting needs JavaScript."
  note: "No cookies, no account. To count each device once, the server keeps a salted hash of your IP address and browser — not the address itself. Details in the <a href=\"/privacy/\">privacy notice</a>."
 ---
 *Furtka* is Polish for a small garden gate — the little door in the fence
 that lets you in without opening the whole thing. Both marks play with that:
 one draws the letter into the gate, the other looks through the gate at a
 wheel. Vote right here — or scroll on first and see both marks everywhere
 they would have to work, from a poster to the tiny icon in a browser tab.
--- a/website/data/logo/m.json
+++ b/website/data/logo/m.json
@ -1,12 +0,0 @@
 {
 "display": "<svg class=\"pm\" viewBox=\"0 0 64 64\" aria-hidden=\"true\" focusable=\"false\"><defs><linearGradient id=\"gmd\" x1=\".15\" y1=\"0\" x2=\".7\" y2=\"1\"><stop offset=\"0\" stop-color=\"#d95a45\"/><stop offset=\".55\" stop-color=\"#c03a28\"/><stop offset=\"1\" stop-color=\"#8a2618\"/></linearGradient><clipPath id=\"cmd\" clip-rule=\"evenodd\"><path d=\"M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z\"/></clipPath></defs><path fill=\"url(#gmd)\" fill-rule=\"evenodd\" d=\"M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z\"/><g clip-path=\"url(#cmd)\"><path fill=\"#fff\" opacity=\".14\" d=\"M6 28a26 26 0 0 1 52 0v4.5a26 26 0 0 0-52 0Z\"/></g></svg>",
 "flat": "<svg class=\"pm\" viewBox=\"0 0 64 64\" aria-hidden=\"true\" focusable=\"false\"><path fill=\"currentColor\" fill-rule=\"evenodd\" d=\"M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z\"/></svg>",
 "min": "<svg class=\"pm\" viewBox=\"0 0 64 64\" aria-hidden=\"true\" focusable=\"false\"><path fill=\"currentColor\" fill-rule=\"evenodd\" d=\"M5 60V27a27 27 0 0 1 54 0v33Z M19.5 60V26A10 10 0 0 1 29.5 16H46v10H32a2.5 2.5 0 0 0-2.5 2.5V32H46v10H29.5v18Z\"/></svg>",
 "lockup_h": "<svg class=\"pm\" viewBox=\"0 -4 232.44 64.00\" aria-hidden=\"true\" focusable=\"false\"><g transform=\"scale(1.0000) translate(-6 -2)\"><path fill=\"currentColor\" fill-rule=\"evenodd\" d=\"M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z\"/></g><g fill=\"currentColor\"><path transform=\"translate(68.24 58.00) scale(0.05354 -0.05354)\" d=\"M115 0V494H30V600H115V637Q115 687 132.5 724.0Q150 761 192.0 781.5Q234 802 305 802Q333 802 358 799V695Q344 698 324 698Q287 698 273.5 682.0Q260 666 260 632V600H358V494H260V0Z\"/><path transform=\"translate(87.21 58.00) scale(0.05354 -0.05354)\" d=\"M271 -15Q169 -15 119.0 48.5Q69 112 69 218V600H218V244Q218 179 241.5 143.0Q265 107 316 107Q379 107 413.0 156.0Q447 205 447 276V600H596V0H462V90H438Q423 44 382.5 14.5Q342 -15 271 -15Z\"/><path transform=\"translate(121.45 58.00) scale(0.05354 -0.05354)\" d=\"M76 0V600H211V492H235Q241 521 257.0 547.0Q273 573 307.0 589.5Q341 606 399 606H428V471H387Q301 471 263.0 427.0Q225 383 225 294V0Z\"/><path transform=\"translate(144.17 58.00) scale(0.05354 -0.05354)\" d=\"M162 0Q139 27 125.5 65.0Q112 103 112 179V494H30V600H114V750H259V600H358V494H260V196Q260 116 278.0 74.5Q296 33 321 6V0Z\"/><path transform=\"translate(163.14 58.00) scale(0.05354 -0.05354)\" d=\"M78 0V800H226V366H274L449 600H608V594L397 320L632 6V0H457L274 254H226V0Z\"/><path transform=\"translate(195.88 58.00) scale(0.05354 -0.05354)\" d=\"M280 -13Q198 -13 144.0 27.5Q90 68 63.5 138.5Q37 209 37 301Q37 395 64.0 465.0Q91 535 145.0 574.0Q199 613 280 613Q344 613 384.5 587.5Q425 562 445 522H469V600H606V0H469V78H445Q425 41 385.0 14.0Q345 -13 280 -13ZM317 95Q381 95 419.5 151.0Q458 207 458 300Q458 394 419.5 449.5Q381 505 317 505Q257 505 223.5 453.0Q190 401 190 300Q190 199 223.5 147.0Q257 95 317 95Z\"/></g></svg>",
 "lockup_s": "<svg class=\"pm\" viewBox=\"0 0 164.20 125.89\" aria-hidden=\"true\" focusable=\"false\"><g transform=\"translate(56.10 0) scale(1.0000) translate(-6 -2)\"><path fill=\"currentColor\" fill-rule=\"evenodd\" d=\"M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z\"/></g><g fill=\"currentColor\"><path transform=\"translate(0.00 111.76) scale(0.05354 -0.05354)\" d=\"M115 0V494H30V600H115V637Q115 687 132.5 724.0Q150 761 192.0 781.5Q234 802 305 802Q333 802 358 799V695Q344 698 324 698Q287 698 273.5 682.0Q260 666 260 632V600H358V494H260V0Z\"/><path transform=\"translate(18.97 111.76) scale(0.05354 -0.05354)\" d=\"M271 -15Q169 -15 119.0 48.5Q69 112 69 218V600H218V244Q218 179 241.5 143.0Q265 107 316 107Q379 107 413.0 156.0Q447 205 447 276V600H596V0H462V90H438Q423 44 382.5 14.5Q342 -15 271 -15Z\"/><path transform=\"translate(53.21 111.76) scale(0.05354 -0.05354)\" d=\"M76 0V600H211V492H235Q241 521 257.0 547.0Q273 573 307.0 589.5Q341 606 399 606H428V471H387Q301 471 263.0 427.0Q225 383 225 294V0Z\"/><path transform=\"translate(75.93 111.76) scale(0.05354 -0.05354)\" d=\"M162 0Q139 27 125.5 65.0Q112 103 112 179V494H30V600H114V750H259V600H358V494H260V196Q260 116 278.0 74.5Q296 33 321 6V0Z\"/><path transform=\"translate(94.90 111.76) scale(0.05354 -0.05354)\" d=\"M78 0V800H226V366H274L449 600H608V594L397 320L632 6V0H457L274 254H226V0Z\"/><path transform=\"translate(127.64 111.76) scale(0.05354 -0.05354)\" d=\"M280 -13Q198 -13 144.0 27.5Q90 68 63.5 138.5Q37 209 37 301Q37 395 64.0 465.0Q91 535 145.0 574.0Q199 613 280 613Q344 613 384.5 587.5Q425 562 445 522H469V600H606V0H469V78H445Q425 41 385.0 14.0Q345 -13 280 -13ZM317 95Q381 95 419.5 151.0Q458 207 458 300Q458 394 419.5 449.5Q381 505 317 505Q257 505 223.5 453.0Q190 401 190 300Q190 199 223.5 147.0Q257 95 317 95Z\"/></g></svg>",
 "tab16": "data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAABJklEQVR42sWRvUoDURCFv9msf1hoZyFCGmEjWks2iIkSi9gIIZ2FQWx9BX0Gn0GsrUwjCSmMaB1ICBEsxMJGK8F13bHYmFzWJQQi+HX3zsyZc88VIlyvry7YCf8YZQ9huXfdUeRyEu8s03h4MfvFPFTd1K5FcA4yTzyvIrK/edO6+iVQTa9sWxJUgAmG4wXKztZtu94XqGWT0+JNdUCWGI3H9znfKVS6HzaAeDMlUGNY7hUOc41W05yquc6pwAmQnH2zi8CFFZaCvNHn69dnMTocRYU8gN3buGjUnnN33SeAetpxEdkYDGkG/QkvdBwKKJbxH4Gx5Qj0YLDWcKCSMBzEk220y0A5JoM+FmMy1EE9kyqgrMVlMJKAqpaA2Az+7An/LzA232GMWfyHzvuOAAAAAElFTkSuQmCC",
 "full16": "data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAABJUlEQVR42sWRz0oCYRTFf3dmkDbSbqCwTQQzPUGkgRriE6TQrnqGwKB1u54jwjbtIxzB0hdIC7fppjb92SQ1t0WMfZlOgUFnd7977uGc8wlj0Mh4yYFK0UaWABDt2ujZ2sXN0yhXzKFawnb7fgVlD0iOcB9BDrKXnUOB8JtAtYTt9vxjYIM4qFSzzc5mJGJF727fr/x4/BGnXE8v735x0Mh4yVeVnmH7NlRr6z7VDsonvEXkYNWvIeSAB03YqXxw9ewADFSKlpFZQ9leb7XPY3zM8hIWgFMHwBI89HN7t9Cp0YJ62ttXZMc4nDfK8AEcAFUS5ndEtlWlgLA4vgtmhgKTkGte583Z6GAIiykR6yBI+0fAyvgOfiGAMjexg7+K8P8CU+Md2cpUHzmzh4cAAAAASUVORK5CYII=",
 "banner": "           ▄▄▄▄▄▄▄▄\n        ▄████████████▄\n     ▄██████████████████\n    ▄█████████▀▀▀▀▀▀▀████▄\n   ▄██████▀          █████▄\n   ██████▀           ██████\n   ██████     █████████████\n   ██████     ▀▀▀▀▀▀▀██████\n   ██████            ██████\n   ██████     ▄▄▄▄▄▄▄██████\n   ██████     █████████████\n   ██████     █████████████\n   ██████     █████████████\n   ██████     █████████████\n",
 "color": "#c03a28",
 "ink": "#0d0d0f"
 }
--- a/website/data/logo/r.json
+++ b/website/data/logo/r.json
@ -1,12 +0,0 @@
 {
 "display": "<svg class=\"pm\" viewBox=\"0 0 104 114\" aria-hidden=\"true\" focusable=\"false\"><defs><clipPath id=\"crd\" clip-rule=\"evenodd\"><path clip-rule=\"evenodd\" d=\"M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z\"/></clipPath><linearGradient id=\"grd\" gradientUnits=\"userSpaceOnUse\" x1=\"0\" y1=\"2\" x2=\"0\" y2=\"112\"><stop offset=\"0\" stop-color=\"#c9803f\"/><stop offset=\".6\" stop-color=\"#af6428\"/><stop offset=\"1\" stop-color=\"#9a561f\"/></linearGradient></defs><g fill=\"none\" stroke=\"url(#grd)\" stroke-width=\"8\" stroke-linejoin=\"round\"><path d=\"M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z\"/><path d=\"M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9\" clip-path=\"url(#crd)\"/><path d=\"M52 22H79M52 37H69\" stroke-linecap=\"round\"/><circle cx=\"52\" cy=\"65\" r=\"15\"/></g></svg>",
 "flat": "<svg class=\"pm\" viewBox=\"0 0 104 114\" aria-hidden=\"true\" focusable=\"false\"><defs><clipPath id=\"c\" clip-rule=\"evenodd\"><path clip-rule=\"evenodd\" d=\"M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z\"/></clipPath></defs><g fill=\"none\" stroke=\"currentColor\" stroke-width=\"8\" stroke-linejoin=\"round\"><path d=\"M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z\"/><path d=\"M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9\" clip-path=\"url(#c)\"/><path d=\"M52 22H79M52 37H69\" stroke-linecap=\"round\"/><circle cx=\"52\" cy=\"65\" r=\"15\"/></g></svg>",
 "min": "<svg class=\"pm\" viewBox=\"0 0 104 114\" aria-hidden=\"true\" focusable=\"false\"><g fill=\"none\" stroke=\"currentColor\" stroke-width=\"11\" stroke-linejoin=\"round\"><path d=\"M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z\"/><path d=\"M52 8V106M8 65H96\"/><path d=\"M52 23H78M52 39H68\" stroke-linecap=\"round\"/></g><circle cx=\"52\" cy=\"65\" r=\"19\" fill=\"currentColor\"/></svg>",
 "lockup_h": "<svg class=\"pm\" viewBox=\"0 -4 233.17 64.00\" aria-hidden=\"true\" focusable=\"false\"><g transform=\"scale(0.5273) translate(-2 -2)\"><defs><clipPath id=\"c\" clip-rule=\"evenodd\"><path clip-rule=\"evenodd\" d=\"M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z\"/></clipPath></defs><g fill=\"none\" stroke=\"currentColor\" stroke-width=\"8\" stroke-linejoin=\"round\"><path d=\"M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z\"/><path d=\"M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9\" clip-path=\"url(#c)\"/><path d=\"M52 22H79M52 37H69\" stroke-linecap=\"round\"/><circle cx=\"52\" cy=\"65\" r=\"15\"/></g></g><g fill=\"currentColor\"><path transform=\"translate(68.97 58.00) scale(0.05354 -0.05354)\" d=\"M115 0V494H30V600H115V637Q115 687 132.5 724.0Q150 761 192.0 781.5Q234 802 305 802Q333 802 358 799V695Q344 698 324 698Q287 698 273.5 682.0Q260 666 260 632V600H358V494H260V0Z\"/><path transform=\"translate(87.94 58.00) scale(0.05354 -0.05354)\" d=\"M271 -15Q169 -15 119.0 48.5Q69 112 69 218V600H218V244Q218 179 241.5 143.0Q265 107 316 107Q379 107 413.0 156.0Q447 205 447 276V600H596V0H462V90H438Q423 44 382.5 14.5Q342 -15 271 -15Z\"/><path transform=\"translate(122.17 58.00) scale(0.05354 -0.05354)\" d=\"M76 0V600H211V492H235Q241 521 257.0 547.0Q273 573 307.0 589.5Q341 606 399 606H428V471H387Q301 471 263.0 427.0Q225 383 225 294V0Z\"/><path transform=\"translate(144.90 58.00) scale(0.05354 -0.05354)\" d=\"M162 0Q139 27 125.5 65.0Q112 103 112 179V494H30V600H114V750H259V600H358V494H260V196Q260 116 278.0 74.5Q296 33 321 6V0Z\"/><path transform=\"translate(163.87 58.00) scale(0.05354 -0.05354)\" d=\"M78 0V800H226V366H274L449 600H608V594L397 320L632 6V0H457L274 254H226V0Z\"/><path transform=\"translate(196.60 58.00) scale(0.05354 -0.05354)\" d=\"M280 -13Q198 -13 144.0 27.5Q90 68 63.5 138.5Q37 209 37 301Q37 395 64.0 465.0Q91 535 145.0 574.0Q199 613 280 613Q344 613 384.5 587.5Q425 562 445 522H469V600H606V0H469V78H445Q425 41 385.0 14.0Q345 -13 280 -13ZM317 95Q381 95 419.5 151.0Q458 207 458 300Q458 394 419.5 449.5Q381 505 317 505Q257 505 223.5 453.0Q190 401 190 300Q190 199 223.5 147.0Q257 95 317 95Z\"/></g></svg>",
 "lockup_s": "<svg class=\"pm\" viewBox=\"0 0 164.20 125.89\" aria-hidden=\"true\" focusable=\"false\"><g transform=\"translate(55.74 0) scale(0.5273) translate(-2 -2)\"><defs><clipPath id=\"c\" clip-rule=\"evenodd\"><path clip-rule=\"evenodd\" d=\"M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z\"/></clipPath></defs><g fill=\"none\" stroke=\"currentColor\" stroke-width=\"8\" stroke-linejoin=\"round\"><path d=\"M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z\"/><path d=\"M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9\" clip-path=\"url(#c)\"/><path d=\"M52 22H79M52 37H69\" stroke-linecap=\"round\"/><circle cx=\"52\" cy=\"65\" r=\"15\"/></g></g><g fill=\"currentColor\"><path transform=\"translate(0.00 111.76) scale(0.05354 -0.05354)\" d=\"M115 0V494H30V600H115V637Q115 687 132.5 724.0Q150 761 192.0 781.5Q234 802 305 802Q333 802 358 799V695Q344 698 324 698Q287 698 273.5 682.0Q260 666 260 632V600H358V494H260V0Z\"/><path transform=\"translate(18.97 111.76) scale(0.05354 -0.05354)\" d=\"M271 -15Q169 -15 119.0 48.5Q69 112 69 218V600H218V244Q218 179 241.5 143.0Q265 107 316 107Q379 107 413.0 156.0Q447 205 447 276V600H596V0H462V90H438Q423 44 382.5 14.5Q342 -15 271 -15Z\"/><path transform=\"translate(53.21 111.76) scale(0.05354 -0.05354)\" d=\"M76 0V600H211V492H235Q241 521 257.0 547.0Q273 573 307.0 589.5Q341 606 399 606H428V471H387Q301 471 263.0 427.0Q225 383 225 294V0Z\"/><path transform=\"translate(75.93 111.76) scale(0.05354 -0.05354)\" d=\"M162 0Q139 27 125.5 65.0Q112 103 112 179V494H30V600H114V750H259V600H358V494H260V196Q260 116 278.0 74.5Q296 33 321 6V0Z\"/><path transform=\"translate(94.90 111.76) scale(0.05354 -0.05354)\" d=\"M78 0V800H226V366H274L449 600H608V594L397 320L632 6V0H457L274 254H226V0Z\"/><path transform=\"translate(127.64 111.76) scale(0.05354 -0.05354)\" d=\"M280 -13Q198 -13 144.0 27.5Q90 68 63.5 138.5Q37 209 37 301Q37 395 64.0 465.0Q91 535 145.0 574.0Q199 613 280 613Q344 613 384.5 587.5Q425 562 445 522H469V600H606V0H469V78H445Q425 41 385.0 14.0Q345 -13 280 -13ZM317 95Q381 95 419.5 151.0Q458 207 458 300Q458 394 419.5 449.5Q381 505 317 505Q257 505 223.5 453.0Q190 401 190 300Q190 199 223.5 147.0Q257 95 317 95Z\"/></g></svg>",
 "tab16": "data:image/png;base64,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",
 "full16": "data:image/png;base64,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",
 "banner": "         ▄▄▄▄▄▄▄▄▄▄▄▄\n     ▄▄████▀▀████▀▀████▄▄\n   ▄██▀▀      ██      ▀▀██▄\n  ██▀         ██████████ ▀██\n ███          ██          ▀██\n ████▄        ███████      ██\n ██▀▀██▄▄     ██           ██\n ██   ▀▀██▄▄██████▄        ██\n ██      ▀██▀▀  ▀▀██       ██\n ███████████      ███████████\n ██      ▀██▄    ▄██▀      ██\n ██    ▄██████████████▄    ██\n ██ ▄▄██▀▀   ▀██▀   ▀▀██▄▄ ██\n ████▀▀       ██       ▀▀████\n ██▀          ██          ▀██\n ██▄▄▄▄▄▄▄▄▄▄████▄▄▄▄▄▄▄▄▄▄██\n ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀",
 "color": "#af6428",
 "ink": "#151515"
 }
--- a/website/deploy-ci.sh
+++ b/website/deploy-ci.sh
@ -11,13 +11,6 @@ HERE="$(cd "$(dirname "$0")" && pwd)"
 SRCROOT="${FURTKA_SRCROOT:-/srv/furtka-site}"
 WEBROOT="${FURTKA_WEBROOT:-/var/www/furtka.org}"
 # The runner job runs as root inside the container; hand the trees back
 # to the VM user no matter how this script ends, so the manual deploy.sh
 # path keeps working even after a failed build.
 if [ "$(id -u)" = 0 ]; then
  trap 'chown -R "${FURTKA_OWNER:-1000:1000}" "$SRCROOT" "$WEBROOT"' EXIT
 fi
 echo "==> rsync website/ → $SRCROOT"
 rsync -az --delete \
  --exclude='.hugo_build.lock' \
--- a/website/hugo.toml
+++ b/website/hugo.toml
@ -6,7 +6,7 @@ enableRobotsTXT = true
 [params]
  description = "Open-source home server OS — simple enough for everyone."
-  version = "26.20-alpha"
+  version = "26.16-alpha"
  contactEmail = "hallo@furtka.org"
 [markup.goldmark.renderer]
--- a/website/layouts/index.html
+++ b/website/layouts/index.html
@ -12,9 +12,6 @@
        <span aria-hidden="true">→</span>
      </a>
    </p>
    {{ with .Params.poll_link }}
    <p class="reveal"><a class="home-poll" href="{{ . }}">{{ partial "mark-m.html" (dict "class" "" "id" "hm") }}{{ partial "mark-r.html" (dict "class" "" "id" "hr") }}<span>{{ $.Params.poll_text }} →</span></a></p>
    {{ end }}
  </header>
  {{ with .Params.intro }}
--- a/website/layouts/partials/head.html
+++ b/website/layouts/partials/head.html
@ -1,11 +1,7 @@
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
 <script>document.documentElement.classList.replace('no-js','js');</script>
-{{ if eq .Type "poll" }}{{/* Coin-flip which mark sits left/first, so neither side collects the
+<title>{{ if .IsHome }}{{ site.Title }} — {{ site.Params.description }}{{ else }}{{ .Title }} · {{ site.Title }}{{ end }}</title>
   "first thing on the page" votes. Decided before first paint (no reflow), applied by CSS `order`,
   and kept for the tab session so a reload or a vote doesn't shuffle the page under the visitor. */}}
 <script>(function(){var k='furtka-logo-order',o=null;try{o=sessionStorage.getItem(k)}catch(e){}if(o!=='mr'&&o!=='rm'){o=Math.random()<0.5?'mr':'rm';try{sessionStorage.setItem(k,o)}catch(e){}}document.documentElement.setAttribute('data-logo-order',o)})();</script>
 {{ end }}<title>{{ if .IsHome }}{{ site.Title }} — {{ site.Params.description }}{{ else }}{{ .Title }} · {{ site.Title }}{{ end }}</title>
 <meta name="description" content="{{ with .Params.description }}{{ . }}{{ else }}{{ site.Params.description }}{{ end }}">
 <meta name="theme-color" content="#f7f6f3" media="(prefers-color-scheme: light)">
 <meta name="theme-color" content="#0d0d0f" media="(prefers-color-scheme: dark)">
@ -15,10 +11,6 @@
 <meta property="og:description" content="{{ with .Params.description }}{{ . }}{{ else }}{{ site.Params.description }}{{ end }}">
 <meta property="og:type" content="{{ if .IsPage }}article{{ else }}website{{ end }}">
 <meta property="og:url" content="{{ .Permalink }}">
 {{ with .Params.image }}<meta property="og:image" content="{{ . | absURL }}">
 <meta property="og:image:width" content="1200">
 <meta property="og:image:height" content="630">
 <meta name="twitter:card" content="summary_large_image">{{ end }}
 {{ $parts := split .Site.Language.LanguageCode "-" }}<meta property="og:locale" content="{{ index $parts 0 }}{{ if gt (len $parts) 1 }}_{{ upper (index $parts 1) }}{{ end }}">
 {{ range .AllTranslations }}
 <link rel="alternate" hreflang="{{ .Lang }}" href="{{ .Permalink }}">
--- a/website/layouts/partials/mark-m.html
+++ b/website/layouts/partials/mark-m.html
@ -1,2 +0,0 @@
 {{- /* Mark M — lowercase f cut out of a gate. 64-unit grid, even-odd knockout. */ -}}
 <svg class="pm {{ .class }}" viewBox="0 0 64 64" aria-hidden="true" focusable="false"><path fill="currentColor" fill-rule="evenodd" d="M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z"/></svg>
--- a/website/layouts/partials/mark-r.html
+++ b/website/layouts/partials/mark-r.html
@ -1,2 +0,0 @@
 {{- /* Mark R — window, wheel and F. 104x114 grid, stroke 8, hub knocked out. */ -}}
 <svg class="pm {{ .class }}" viewBox="0 0 104 114" aria-hidden="true" focusable="false"><defs><clipPath id="pm-rc-{{ .id }}" clip-rule="evenodd"><path clip-rule="evenodd" d="M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z"/></clipPath></defs><g fill="none" stroke="currentColor" stroke-width="8" stroke-linejoin="round"><path d="M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z"/><path d="M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9" clip-path="url(#pm-rc-{{ .id }})"/><path d="M52 22H79M52 37H69" stroke-linecap="round"/><circle cx="52" cy="65" r="15"/></g></svg>
--- a/website/layouts/poll/single.html
+++ b/website/layouts/poll/single.html
@ -1,168 +0,0 @@
 {{ define "main" }}
 {{- $p := .Params -}}
 {{/* Display order of the two marks; flip via `order: [r, m]` in front matter so neither
    side gets the "first thing on the page" advantage for the whole poll. */}}
 {{- $order := $p.order | default (slice "m" "r") -}}
 {{- $s := $p.show -}}
 <article class="poll" data-poll="{{ $p.poll }}" data-api="/api/poll/{{ $p.poll }}">
  <header class="page-header">
    <h1>{{ .Title }}</h1>
    {{ with $p.description }}<p class="lede">{{ . }}</p>{{ end }}
  </header>
  <div class="prose">{{ .Content }}</div>
  {{/* ── Quick vote ─────────────────────────────────────────── */}}
  <div class="poll-grid" id="vote">
    {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
    {{ $c := index $p $k }}
    <section class="poll-card" data-choice="{{ $k }}" aria-labelledby="poll-{{ $k }}-title">
      <div class="poll-art poll-art--{{ $k }}">{{ $d.display | safeHTML }}</div>
      <h2 id="poll-{{ $k }}-title">{{ $c.title }}</h2>
      <p class="poll-desc">{{ $c.text }}</p>
      <button type="button" class="poll-btn" data-vote="{{ $k }}">{{ $p.labels.vote }}</button>
      <div class="poll-bar" aria-hidden="true"><i></i></div>
      <p class="poll-count" data-count="{{ $k }}"></p>
    </section>
    {{ end }}
  </div>
  <p class="poll-status" role="status" aria-live="polite"
     data-t-voted="{{ $p.labels.voted }}"
     data-t-total="{{ $p.labels.total }}"
     data-t-error="{{ $p.labels.error }}"
     data-t-change="{{ $p.labels.change }}">{{ $p.labels.nojs }}</p>
  {{/* ── Showcase ───────────────────────────────────────────── */}}
  <div class="show">
    <p class="section-eyebrow show-intro">{{ $s.intro }}</p>
    <section class="show-row">
      <h2 class="show-h">{{ $s.sizes }}</h2>
      <p class="show-p">{{ $s.sizes_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <div class="sizes">
            <figure><span class="sz sz-96">{{ $d.flat | safeHTML }}</span><figcaption>96</figcaption></figure>
            <figure><span class="sz sz-48">{{ $d.flat | safeHTML }}</span><figcaption>48</figcaption></figure>
            <figure><span class="sz sz-32">{{ $d.min | safeHTML }}</span><figcaption>32</figcaption></figure>
            <figure><span class="sz sz-24">{{ $d.min | safeHTML }}</span><figcaption>24</figcaption></figure>
            <figure><img class="px" src="{{ $d.tab16 | safeURL }}" width="16" height="16" alt=""><figcaption>16</figcaption></figure>
          </div>
        </div>
        {{ end }}
      </div>
    </section>
    <section class="show-row">
      <h2 class="show-h">{{ $s.name }}</h2>
      <p class="show-p">{{ $s.name_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <div class="lock lock-h">{{ $d.lockup_h | safeHTML }}</div>
          <div class="lock lock-s">{{ $d.lockup_s | safeHTML }}</div>
        </div>
        {{ end }}
      </div>
    </section>
    <section class="show-row">
      <h2 class="show-h">{{ $s.browser }}</h2>
      <p class="show-p">{{ $s.browser_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <div class="mock">
            <div class="tabbar"><span class="tab"><img class="px" src="{{ $d.tab16 | safeURL }}" width="16" height="16" alt="">Furtka</span></div>
            <div class="urlbar">https://furtka.org</div>
            <div class="uihead"><span class="uihead-mark">{{ $d.flat | safeHTML }}</span><span class="uihead-name">Furtka</span><span class="uihead-nav"><span>{{ $s.nav1 }}</span><span>{{ $s.nav2 }}</span></span></div>
            <div class="uibody"><i></i><i class="s"></i></div>
          </div>
        </div>
        {{ end }}
      </div>
    </section>
    <section class="show-row">
      <h2 class="show-h">{{ $s.phone }}</h2>
      <p class="show-p">{{ $s.phone_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <div class="tiles"><img src="/img/logo/{{ $k }}/tile.png" width="96" height="96" alt=""><img src="/img/logo/{{ $k }}/tile-round.png" width="96" height="96" alt=""></div>
        </div>
        {{ end }}
      </div>
    </section>
    <section class="show-row">
      <h2 class="show-h">{{ $s.box }}</h2>
      <p class="show-p">{{ $s.box_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <pre class="term"><i>{{ $d.banner }}</i>
  <b>Furtka is ready.</b>  Open http://furtka.local</pre>
          <img class="shot" src="/img/logo/{{ $k }}/splash.png" width="960" height="540" alt="">
        </div>
        {{ end }}
      </div>
    </section>
    <section class="show-row">
      <h2 class="show-h">{{ $s.shared }}</h2>
      <p class="show-p">{{ $s.shared_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <img class="shot" src="/img/logo/{{ $k }}/social.png" width="600" height="315" alt="">
        </div>
        {{ end }}
      </div>
    </section>
    <section class="show-row">
      <h2 class="show-h">{{ $s.colour }}</h2>
      <p class="show-p">{{ $s.colour_text }}</p>
      <div class="show-pair">
        {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
        <div class="show-cell show-cell--{{ $k }}">
          <span class="show-tag">{{ index $p $k "short" }}</span>
          <div class="grounds">
            <span class="ground" style="background:#f7f6f3;color:{{ $d.color }}">{{ $d.flat | safeHTML }}</span>
            <span class="ground" style="background:{{ $d.ink }};color:{{ $d.color }}">{{ $d.flat | safeHTML }}</span>
            <span class="ground" style="background:{{ $d.color }};color:#f7f6f3">{{ $d.flat | safeHTML }}</span>
            <span class="ground ground--fg">{{ $d.flat | safeHTML }}</span>
          </div>
        </div>
        {{ end }}
      </div>
    </section>
  </div>
  {{/* ── Vote again at the end ─────────────────────────────── */}}
  <section class="poll-final">
    <h2 class="show-h">{{ $s.final }}</h2>
    <div class="poll-final-row">
      {{ range $k := $order }}{{ $d := index site.Data.logo $k }}
      <div class="poll-final-card" data-choice="{{ $k }}">
        <span class="poll-final-mark show-cell--{{ $k }}">{{ $d.flat | safeHTML }}</span>
        <button type="button" class="poll-btn" data-vote="{{ $k }}">{{ $p.labels.vote }} — {{ index $p $k "short" }}</button>
        <div class="poll-bar" aria-hidden="true"><i></i></div>
        <p class="poll-count" data-count="{{ $k }}"></p>
      </div>
      {{ end }}
    </div>
  </section>
  <p class="poll-note">{{ $p.labels.note | safeHTML }}</p>
 </article>
 {{ $js := resources.Get "js/poll.js" | minify | fingerprint }}
 <script defer src="{{ $js.RelPermalink }}" integrity="{{ $js.Data.Integrity }}"></script>
 {{ end }}
--- a/website/static/img/logo/m/social.png
+++ b/website/static/img/logo/m/social.png
--- a/website/static/img/logo/m/splash.png
+++ b/website/static/img/logo/m/splash.png
--- a/website/static/img/logo/m/tile-round.png
+++ b/website/static/img/logo/m/tile-round.png
--- a/website/static/img/logo/m/tile.png
+++ b/website/static/img/logo/m/tile.png
--- a/website/static/img/logo/r/social.png
+++ b/website/static/img/logo/r/social.png
--- a/website/static/img/logo/r/splash.png
+++ b/website/static/img/logo/r/splash.png
--- a/website/static/img/logo/r/tile-round.png
+++ b/website/static/img/logo/r/tile-round.png
--- a/website/static/img/logo/r/tile.png
+++ b/website/static/img/logo/r/tile.png
--- a/website/static/img/logo/vote-card.png
+++ b/website/static/img/logo/vote-card.png
--- a/website/tools/FONT-PROVENANCE.md
+++ b/website/tools/FONT-PROVENANCE.md
@ -1,9 +0,0 @@
 # Build-time font
 `FamiljenGrotesk-SemiBold.ttf` — Familjen Grotesk, weight 600, fetched from
 Google Fonts (fonts.gstatic.com, family `Familjen+Grotesk:wght@600`) on
 2026-08-26. Licence: SIL Open Font License 1.1.
 It is used **only** by `tools/logo-assets.py` to outline the wordmark into
 SVG paths and to render the splash / social-card PNGs. The site itself ships
 no webfonts.
--- a/website/tools/FamiljenGrotesk-SemiBold.ttf
+++ b/website/tools/FamiljenGrotesk-SemiBold.ttf
--- a/website/tools/logo-assets.py
+++ b/website/tools/logo-assets.py
@ -1,291 +0,0 @@
 #!/usr/bin/env python3
 """Generate the logo-poll showcase assets for /logo/ from one geometry source.
    python3 website/tools/logo-assets.py
 Writes website/static/img/logo/{m,r}/*.png and website/data/logo/{m,r}.json.
 Needs: cairosvg, Pillow, fontTools (pip). Run it on the dev box and commit
 the output — the site build itself needs nothing beyond Hugo.
 Mark M: lowercase f knocked out of a gate, 64-unit grid (even-odd fill).
 Mark R: window, wheel and F, 104x114 grid, stroke 8 (from Robert's sketch).
 """
 import base64
 import io
 import json
 import os
 import sys
 import cairosvg
 from fontTools.pens.svgPathPen import SVGPathPen
 from fontTools.ttLib import TTFont
 from PIL import Image, ImageDraw
 HERE = os.path.dirname(os.path.abspath(__file__))
 SITE = os.path.dirname(HERE)
 FONT = os.path.join(HERE, "FamiljenGrotesk-SemiBold.ttf")
 XMLNS = 'xmlns="http://www.w3.org/2000/svg"'
 # ---------------------------------------------------------------- geometry
 M_FLAT = (
    "M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6"
    "H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z"
 )
 M_MIN = (
    "M5 60V27a27 27 0 0 1 54 0v33Z M19.5 60V26A10 10 0 0 1 29.5 16H46v10H32"
    "a2.5 2.5 0 0 0-2.5 2.5V32H46v10H29.5v18Z"
 )
 R_FRAME = "M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z"
 R_OUTER = "M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z"
 R_HOLE = "M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z"
 R_SPOKES = "M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9"
 R_ARMS = "M52 22H79M52 37H69"
 MARKS = {
    "m": {
        "vb": (0, 0, 64, 64),
        "box": (6, 2, 52, 58),  # x, y, w, h of the drawn mark inside the viewBox
        "color": "#c03a28",
        "ink": "#0d0d0f",
        "grad": ("#d95a45", "#c03a28", "#8a2618"),
    },
    "r": {
        "vb": (0, 0, 104, 114),
        "box": (2, 2, 100, 110),
        "color": "#af6428",
        "ink": "#151515",
        "grad": ("#c9803f", "#af6428", "#9a561f"),
    },
 }
 def body(k, tier, color="currentColor", uid=""):
    """SVG inner markup for mark k at tier display | flat | min."""
    if k == "m":
        if tier == "display":
            g = MARKS["m"]["grad"]
            return (
                f'<defs><linearGradient id="g{uid}" x1=".15" y1="0" x2=".7" y2="1">'
                f'<stop offset="0" stop-color="{g[0]}"/><stop offset=".55" stop-color="{g[1]}"/>'
                f'<stop offset="1" stop-color="{g[2]}"/></linearGradient>'
                f'<clipPath id="c{uid}" clip-rule="evenodd"><path d="{M_FLAT}"/></clipPath></defs>'
                f'<path fill="url(#g{uid})" fill-rule="evenodd" d="{M_FLAT}"/>'
                f'<g clip-path="url(#c{uid})"><path fill="#fff" opacity=".14" '
                f'd="M6 28a26 26 0 0 1 52 0v4.5a26 26 0 0 0-52 0Z"/></g>'
            )
        path = M_MIN if tier == "min" else M_FLAT
        return f'<path fill="{color}" fill-rule="evenodd" d="{path}"/>'
    if tier == "min":
        return (
            f'<g fill="none" stroke="{color}" stroke-width="11" stroke-linejoin="round">'
            f'<path d="{R_FRAME}"/><path d="M52 8V106M8 65H96"/>'
            f'<path d="M52 23H78M52 39H68" stroke-linecap="round"/></g>'
            f'<circle cx="52" cy="65" r="19" fill="{color}"/>'
        )
    defs = (
        f'<clipPath id="c{uid}" clip-rule="evenodd"><path clip-rule="evenodd" '
        f'd="{R_OUTER} {R_HOLE}"/></clipPath>'
    )
    if tier == "display":
        g = MARKS["r"]["grad"]
        defs += (
            f'<linearGradient id="g{uid}" gradientUnits="userSpaceOnUse" x1="0" y1="2" x2="0" y2="112">'
            f'<stop offset="0" stop-color="{g[0]}"/><stop offset=".6" stop-color="{g[1]}"/>'
            f'<stop offset="1" stop-color="{g[2]}"/></linearGradient>'
        )
        color = f"url(#g{uid})"
    return (
        f"<defs>{defs}</defs>"
        f'<g fill="none" stroke="{color}" stroke-width="8" stroke-linejoin="round">'
        f'<path d="{R_FRAME}"/><path d="{R_SPOKES}" clip-path="url(#c{uid})"/>'
        f'<path d="{R_ARMS}" stroke-linecap="round"/><circle cx="52" cy="65" r="15"/></g>'
    )
 def svg(k, tier, color="currentColor", uid="", cls="pm", standalone=False):
    x, y, w, h = MARKS[k]["vb"]
    ns = f" {XMLNS}" if standalone else ""
    return (
        f'<svg class="{cls}"{ns} viewBox="{x} {y} {w} {h}" aria-hidden="true" focusable="false">'
        f"{body(k, tier, color, uid)}</svg>"
    )
 # ---------------------------------------------------------------- raster
 def raster(svgtxt, w, h):
    png = cairosvg.svg2png(bytestring=svgtxt.encode(), output_width=w, output_height=h)
    return Image.open(io.BytesIO(png)).convert("RGBA")
 def mark_png(k, tier, height, color=None):
    _, _, w, h = MARKS[k]["vb"]
    return raster(svg(k, tier, color or MARKS[k]["color"], standalone=True), round(height * w / h), height)
 # ---------------------------------------------------------------- wordmark
 _font = TTFont(FONT)
 _upm = _font["head"].unitsPerEm
 _cap = _font["OS/2"].sCapHeight or int(_upm * 0.7)
 _glyphs = _font.getGlyphSet()
 _cmap = _font.getBestCmap()
 def wordmark(text, size, x0=0.0, baseline=0.0, tracking=-0.028):
    """Outline text as one SVG path; returns (path_d, advance_width)."""
    s = size / _upm
    parts, x = [], x0
    for ch in text:
        name = _cmap[ord(ch)]
        pen = SVGPathPen(_glyphs)
        g = _glyphs[name]
        g.draw(pen)
        d = pen.getCommands()
        if d:
            parts.append(f'<path transform="translate({x:.2f} {baseline:.2f}) scale({s:.5f} {-s:.5f})" d="{d}"/>')
        x += g.width * s + tracking * size
    return "".join(parts), x - x0 - tracking * size
 def lockup(k, stacked=False):
    """Mark + 'furtka', outlined, currentColor. Returns an inline SVG string."""
    bx, by, bw, bh = MARKS[k]["box"]
    H = 58.0  # mark height in lockup units
    sc = H / bh
    mw = bw * sc
    size = H * 0.72 * _upm / _cap  # cap height = 72 % of the mark height
    if stacked:
        paths, tw = wordmark("furtka", size)
        gap = 12
        total_w = max(mw, tw)
        total_h = H + gap + size * _cap / _upm + size * 0.22
        mx = (total_w - mw) / 2
        tx = (total_w - tw) / 2
        base = H + gap + size * _cap / _upm
        paths, _ = wordmark("furtka", size, x0=tx, baseline=base)
        inner = (
            f'<g transform="translate({mx:.2f} 0) scale({sc:.4f}) translate({-bx} {-by})">{body(k, "flat")}</g>'
            f'<g fill="currentColor">{paths}</g>'
        )
        return f'<svg class="pm" viewBox="0 0 {total_w:.2f} {total_h:.2f}" aria-hidden="true" focusable="false">{inner}</svg>'
    gap = H * 0.28
    paths, tw = wordmark("furtka", size, x0=mw + gap, baseline=H)
    total_w = mw + gap + tw
    inner = (
        f'<g transform="scale({sc:.4f}) translate({-bx} {-by})">{body(k, "flat")}</g>'
        f'<g fill="currentColor">{paths}</g>'
    )
    return f'<svg class="pm" viewBox="0 -4 {total_w:.2f} {H + 6:.2f}" aria-hidden="true" focusable="false">{inner}</svg>'
 def lockup_png(k, W, Hpx, stacked, mark_h):
    """Rasterise the lockup on the mark's ink ground (splash / social card)."""
    ink = MARKS[k]["ink"]
    col = MARKS[k]["color"]
    inner = lockup(k, stacked).replace("currentColor", col)
    inner = inner.replace('<svg class="pm"', f"<svg {XMLNS}")
    vb = inner.split('viewBox="')[1].split('"')[0].split()
    vw, vh = float(vb[2]), float(vb[3])
    scale = mark_h / 58.0
    w, h = round(vw * scale), round(vh * scale)
    im = Image.new("RGBA", (W, Hpx), ink)
    im.alpha_composite(raster(inner, w, h), ((W - w) // 2, (Hpx - h) // 2))
    return im
 # ---------------------------------------------------------------- tiles etc.
 def tile(k, size, pad=0.18, radius=None):
    im = Image.new("RGBA", (size, size), MARKS[k]["ink"])
    m = mark_png(k, "flat", int(size * (1 - 2 * pad)))
    im.alpha_composite(m, ((size - m.width) // 2, (size - m.height) // 2))
    if radius:
        mask = Image.new("L", (size, size), 0)
        ImageDraw.Draw(mask).rounded_rectangle([0, 0, size - 1, size - 1], radius, fill=255)
        im.putalpha(mask)
    return im
 def banner(k, cols=30):
    """Half-block console art (~30 columns) from the interface tier.
    Sampled by coverage: the mark is rendered 4x and box-averaged down to
    one sample per half-character, then thresholded at 50 %.
    """
    _, _, w, h = MARKS[k]["vb"]
    rows = round(cols * h / w)
    rows += rows % 2
    a = raster(svg(k, "flat", "#000", standalone=True), cols * 4, rows * 4).split()[3]
    a = a.resize((cols, rows), Image.BOX)
    lines = []
    for y in range(0, rows, 2):
        s = ""
        for x in range(cols):
            t = a.getpixel((x, y)) > 128
            b = a.getpixel((x, y + 1)) > 128
            s += "█" if t and b else "▀" if t else "▄" if b else " "
        lines.append(s.rstrip())
    return "\n".join(lines)
 def b64png(im):
    buf = io.BytesIO()
    im.save(buf, "PNG", optimize=True)
    return "data:image/png;base64," + base64.b64encode(buf.getvalue()).decode()
 def vote_card(path):
    """1200x630 share card for /logo/: M on cream, R on ink, side by side."""
    W, H = 1200, 630
    im = Image.new("RGBA", (W, H), "#f7f6f3")
    ImageDraw.Draw(im).rectangle([W // 2, 0, W, H], fill=MARKS["r"]["ink"])
    for k, cx in (("m", W // 4), ("r", 3 * W // 4)):
        m = mark_png(k, "flat", 330)
        im.alpha_composite(m, (cx - m.width // 2, 110 - (m.height - 330) // 2))
    size = 46
    d = ImageDraw.Draw(im)
    for text, cx, col in (("M", W // 4, "#6b6b6f"), ("R", 3 * W // 4, "#8a8a90")):
        paths, tw = wordmark(text, size)
        # letters via the same outlines: rasterise a tiny SVG for crisp text
        svgtxt = (f'<svg {XMLNS} viewBox="0 -{size} {tw:.0f} {size * 1.3:.0f}">'
                  f'<g fill="{col}">{paths}</g></svg>')
        t = raster(svgtxt, round(tw), round(size * 1.3))
        im.alpha_composite(t, (cx - t.width // 2, 500))
    # url line, centred on the seam
    paths, tw = wordmark("furtka.org/logo", 40)
    svgtxt = (f'<svg {XMLNS} viewBox="0 -40 {tw:.0f} 52"><g fill="#c03a28">{paths}</g></svg>')
    t = raster(svgtxt, round(tw), 52)
    pad = 18
    box = Image.new("RGBA", (t.width + 2 * pad, t.height + 2 * pad), "#f7f6f3")
    ImageDraw.Draw(box).rounded_rectangle([0, 0, box.width - 1, box.height - 1], 14, outline="#e4e3dc")
    box.alpha_composite(t, (pad, pad))
    im.alpha_composite(box, (W // 2 - box.width // 2, 40))
    im.convert("RGB").save(path, optimize=True)
 def main():
    vote_card(os.path.join(SITE, "static", "img", "logo", "vote-card.png"))
    for k in MARKS:
        out = os.path.join(SITE, "static", "img", "logo", k)
        os.makedirs(out, exist_ok=True)
        tile(k, 192, radius=42).save(os.path.join(out, "tile.png"), optimize=True)
        tile(k, 192, radius=96).save(os.path.join(out, "tile-round.png"), optimize=True)
        lockup_png(k, 960, 540, True, 190).save(os.path.join(out, "splash.png"), optimize=True)
        lockup_png(k, 600, 315, False, 130).save(os.path.join(out, "social.png"), optimize=True)
        data = {
            "display": svg(k, "display", uid=f"{k}d"),
            "flat": svg(k, "flat"),
            "min": svg(k, "min"),
            "lockup_h": lockup(k),
            "lockup_s": lockup(k, stacked=True),
            "tab16": b64png(mark_png(k, "min", 16)),
            "full16": b64png(mark_png(k, "flat", 16)),
            "banner": banner(k),
            "color": MARKS[k]["color"],
            "ink": MARKS[k]["ink"],
        }
        with open(os.path.join(SITE, "data", "logo", f"{k}.json"), "w") as f:
            json.dump(data, f, indent=1, ensure_ascii=False)
        print(k, "ok")
 if __name__ == "__main__":
    sys.exit(main())
		`@ -1,2 +0,0 @@`
			`# Rate limit for the poll API (http context; included from conf.d).`
			`limit_req_zone $binary_remote_addr zone=poll:1m rate=30r/m;`
		`@ -1,2 +0,0 @@`
			`{{- /* Mark M — lowercase f cut out of a gate. 64-unit grid, even-odd knockout. */ -}}`
			`<svg class="pm {{ .class }}" viewBox="0 0 64 64" aria-hidden="true" focusable="false"><path fill="currentColor" fill-rule="evenodd" d="M6 60V28a26 26 0 0 1 52 0v32Z M20.0 60V26.5A10.5 10.5 0 0 1 30.5 16H45.0v8.6H32.5a3.5 3.5 0 0 0-3.5 3.5V32h16v8.6H29.0V60Z"/></svg>`
		`@ -1,2 +0,0 @@`
			`{{- /* Mark R — window, wheel and F. 104x114 grid, stroke 8, hub knocked out. */ -}}`
			<svg class="pm {{ .class }}" viewBox="0 0 104 114" aria-hidden="true" focusable="false"><defs><clipPath id="pm-rc-{{ .id }}" clip-rule="evenodd"><path clip-rule="evenodd" d="M2 112V42A40 40 0 0 1 42 2H62A40 40 0 0 1 102 42V112Z M63 65a11 11 0 1 0-22 0a11 11 0 1 0 22 0Z"/></clipPath></defs><g fill="none" stroke="currentColor" stroke-width="8" stroke-linejoin="round"><path d="M6 108V42A36 36 0 0 1 42 6H62A36 36 0 0 1 98 42V108Z"/><path d="M52 8V106 M8 65H96 M52 65L4 31.1 M52 65L4 98.9 M52 65L100 98.9" clip-path="url(#pm-rc-{{ .id }})"/><path d="M52 22H79M52 37H69" stroke-linecap="round"/><circle cx="52" cy="65" r="15"/></g></svg>